Heat Insulation Silicone Repair Mat, Large Silicone Repair Mat for Soldering Iron, Phone and Computer Repair, Heat Gun, Electronics Repair Disassembly 17.79”11.69” – Blue

#ad
#ad
Shenzhen Baishichuangyou Technology co.ltd. #ad - It easily cleaned nice with soap and water or even rubbing alcohol in daily use. And you also use it big pads as pot holders for pots, computer, for example smart phone, non-slip on tables or counters for pots and pans. Excellent heat insulation performance the mat has excellent heat insulation performance.

The soldering iron can directly solder in the mat. Anti-slip and anti-static design both surface and back side are adopting the anti-slip design. Don't be worried! You just wash and place a couple of days. Its texture is soft, solid and durable to protect soldering iron tip. It won't slide around on your counter or station, and its attractive design keeps small parts away from sliding.

Multifunctional to make your repair work easy, 124 screws position and multiple magnetic notches to classify IC chips and small parts, the mat add built-in scale ruler 0 ~36 cm, which improve your work efficiency and make maintenance platform more clean and tidy. The magnetic notches and 3 parts box keep parts away from loss.

Heat Insulation Silicone Repair Mat, Large Silicone Repair Mat for Soldering Iron, Phone and Computer Repair, Heat Gun, Electronics Repair Disassembly 17.79''11.69'' - Blue #ad - Non-toxic and odorless the mat is made of high quality silicone. You can even place it that is heat-resistant, smart toy, pans, camera, trays, laptop, eyeglasses etc. The high quality heat insulation maintenance desk mat can be resistance to high temperature of 500°C, which can protect the maintenance platform from burn and ruin.

More information about Shenzhen Baishichuangyou Technology co.ltd. #ad

Hakko 599B-02 Wire-type soldering iron tip cleaner

#ad
#ad
American Hakko Products, Inc 599B-02 #ad - No water required. Will not reduce the tip temperature. Cleans better than conventional sponges. These sponges are hard enough to remove debris and some corrosion from the solder tips while being soft enough not to damage the tip. Does not cause premature wear of soldering iron tips. The hakko 599b-02 is a replacement solder tip cleaning wire sponge.

. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering. No contamination risk compared to conventional tip tinners.

More information about American Hakko Products, Inc 599B-02 #ad


Similar products



Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container

#ad
#ad
Thermaltronics FBA_TMT-TC-2 #ad - Minimal residues. Does not cause premature wear of soldering iron tips. Will not reduce the tip temperature. No contamination risk compared to conventional tip tinners. Thermaltronics tmt-tc-2 tip tinners provides fast, efficient cleaning and re-tinning of blackened and highly oxidized soldering iron tips, safely and efficiently.

Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container #ad - . Thermaltronics tmt-tc-2 tip tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station. No water required. Rapidly re-tins badly oxidised soldering iron tips. Removes tip oxidation.

No-clean compatible formulation. Cleans better than conventional sponges. Lead free RoHS Compliant.

More information about Thermaltronics FBA_TMT-TC-2 #ad


Similar products



Micro Cutter

#ad
#ad
Quality Hand Tools CHP-170 #ad - Minimal residues. No water required. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. The hakko chp-170 cutter is an excellent general use tool. 21-degree. Lead free RoHS Compliant. Does not cause premature wear of soldering iron tips.

Micro Cutter #ad - Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. No contamination risk compared to conventional tip tinners. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

Removes tip oxidation. 2. 5mm heat-treated carbon steel construction provides durability and long life. Cleans better than conventional sponges. Rapidly re-tins badly oxidised soldering iron tips. Will not reduce the tip temperature. No-clean compatible formulation.

More information about Quality Hand Tools CHP-170 #ad


Similar products



Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid 2.5mm Width, 1.5m Length- Desoldering Vacuum Pump Solder Remover

#ad
#ad
TABIGER . #ad - Lead free RoHS Compliant. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. Does not cause premature wear of soldering iron tips. Rapidly re-tins badly oxidised soldering iron tips. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

Minimal residues. No contamination risk compared to conventional tip tinners. No-clean compatible formulation. Removes tip oxidation. 21-degree. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Will not reduce the tip temperature.

No water required. Tabiger solder sucker & solder wickit's a must-have tool for electronics kit, while the solder wick used in small, you can use them together,solder sucker for large amounts, hard to reach areas. How to use the solder sucker:◆step 1: press the plunger down until you hear a click sound;◆step 2: Heat up solder around item to be removed by using a soldering iron;◆Step 3: When the solder is liquid, place the tip of the solder sucker next to the liquid and press press the trigger;◆Step 4: Repeat this process if necessary.

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid 2.5mm Width, 1.5m Length- Desoldering Vacuum Pump Solder Remover #ad - How to use the desoldering wick:◆step 1: place the wick over the solder you need to be removed and then just push the heated soldering iron tip onto the wick; ◆Step 2: Remove the wick once the solder has been absorbed; ◆Step 3: Cut off the used part of the wick; ◆Step 4: Repeat this process if needed.

More information about TABIGER . #ad


Similar products



Rosin Paste Flux #135 in a 2 oz Jar

#ad
#ad
SRA Soldering Products FLS135 #ad - Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Rosin leaves a protective coating over soldered area once job is finished Cleans better than conventional sponges. 2. 5mm heat-treated carbon steel construction provides durability and long life.

Rosin Paste Flux #135 in a 2 oz Jar #ad - 21-degree. Contains 2 ounce in a "hockey Puck" jar. No-clean compatible formulation. Does not cause premature wear of soldering iron tips. Rapidly re-tins badly oxidised soldering iron tips. Lead free RoHS Compliant. Removes tip oxidation. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance.

No water required. Will not reduce the tip temperature. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Formulated for use with tin/lead and lead-free alloys.

More information about SRA Soldering Products FLS135 #ad


Similar products



Aven 17010 Adjustable Circuit Board Holder

#ad
#ad
Aven 17010 #ad - Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick. One-handed solder sucker with powerful suction 】 whether you are right or left-handed, the desoldering pump designed with double ring double open and "vacuum" button, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, which make the sucking power awesome.

Desoldering wick with copper braid】 2pcs solder braid with the size 2. 5mm width, work from the tip of the desoldering wick, 1. 5m length, once the desoldering wick and the solder has been heated, this desoldering wick has geometrically-precise weave with copper and rosin, the solder braid can quickly absorbed molten solder and left a clean working area.

Abs body with non-slip sponge and nylon nozzle desoldering pump】 the body of the desoldering vacuum pump is made of high quality ABS, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, thus it can be used for a long time.

Aven 17010 Adjustable Circuit Board Holder #ad - 3-in-1 solder removal tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, a must-have tool for electronics kit, the solder sucker takes up large amounts.

Widely used solder remover】 the desoldering wick & desoldering pump can be used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, desoldering computer parts such as a motherboard, unsoldering old wire from devices, remove relays and other components from printed circuit boards, clean alloy on smd components and more.

The ideal flux for electrical and electronic repairs. The base of this rigid metal stand features four rubber feet to ensure stability.

More information about Aven 17010 #ad


Similar products



NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

#ad
#ad
NTE Electronics, Inc. SW02-10 #ad - Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

No water required. One-handed solder sucker with powerful suction 】 whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.

Desoldering wick with copper braid】 2pcs solder braid with the size 2. 5mm width, work from the tip of the desoldering wick, 1. 5m length, once the desoldering wick and the solder has been heated, this desoldering wick has geometrically-precise weave with copper and rosin, the solder braid can quickly absorbed molten solder and left a clean working area.

Abs body with non-slip sponge and nylon nozzle desoldering pump】 the body of the desoldering vacuum pump is made of high quality ABS, the nylon nozzle of the solder suck can endure high temperature, make it comfortable to hold, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, thus it can be used for a long time.

3-in-1 solder removal tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, the desoldering pump pulls it away quick, the desoldering wick absorbs solder, while the solder wick is better for small amounts of solder, a must-have tool for electronics kit, the solder sucker takes up large amounts.

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length #ad - Widely used solder remover】 the desoldering wick & desoldering pump can be used to correct mistakes with small boards on PCBs, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard, remove relays and other components from printed circuit boards, clean alloy on smd components and more.

More information about NTE Electronics, Inc. SW02-10 #ad


Similar products



MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser Complete with Plunger & Dispensing Tip

#ad
#ad
MG Chemicals 8341-10ML #ad - No-clean compatible formulation. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Cleans better than conventional sponges. No contamination risk compared to conventional tip tinners. After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant.

Compatible with lead free and leaded solder systems. 2. 5mm heat-treated carbon steel construction provides durability and long life. Rubber feet of the base ensure stability. Rapidly re-tins badly oxidised soldering iron tips. Contains 2 ounce in a "hockey Puck" jar. Superior fluxing ability. Minimal residues. Lead free RoHS Compliant.

MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser Complete with Plunger & Dispensing Tip #ad - . Clamps allow PCB to rotate 360 degrees. One-handed solder sucker with powerful suction 】 whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.

Desoldering wick with copper braid】 2pcs solder braid with the size 2. 5mm width, work from the tip of the desoldering wick, 1.

More information about MG Chemicals 8341-10ML #ad


Similar products



Kingsdun 6pcs Dual Ends Metal Spudger Set for iPhone iPad Tablet Mobile Phone Prying Opening Repair Tool Kit

#ad
#ad
Kingsdun Tools #ad - We will get you back within 24hours. 2. 5mm heat-treated carbon steel construction provides durability and long life. Cleans better than conventional sponges. No-clean compatible formulation. Formulated for use with tin/lead and lead-free alloys. Removes tip oxidation. Instant wetting. Superior fluxing ability. Available with standard or anti-static bobbins.

Feedback if you have any questions about the goods or the usage, please do not hesitate to contact our customer service. We appreciate your help in improving our products and service. Rubber feet of the base ensure stability. Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue.

6 pieces complete opening pry tools in hand. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Thixotropic paste; RoHS compliant. Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge 1. 3mm copper and soft wire.

Kingsdun 6pcs Dual Ends Metal Spudger Set for iPhone iPad Tablet Mobile Phone Prying Opening Repair Tool Kit #ad - One-handed solder sucker with powerful suction 】 whether you are right or left-handed, the desoldering pump designed with double ring double open and "vacuum" button, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, which make the sucking power awesome.

More information about Kingsdun Tools #ad


Similar products



Electronics, Smartphone, Computer & Tablet Repair Kit - iFixit Pro Tech Toolkit

#ad
#ad
iFixit IF145-307-4 #ad - Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue. Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance. No water required. Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick.

Electronics, Smartphone, Computer & Tablet Repair Kit - iFixit Pro Tech Toolkit #ad - 21-degree. No contamination risk compared to conventional tip tinners. 2. 5mm heat-treated carbon steel construction provides durability and long life. The screen open pry tool kit help to remove the LCD screen from your mobile devices during repairing. Armed with the data from hundreds of teardowns and thousands of repair guides, our teardown technicians were able to curate the most capable compact toolkit.

Minimal residues. Rubber feet of the base ensure stability. Thixotropic paste; RoHS compliant. No-clean compatible formulation. After soldering, moisture resistant, non conducting, the rosin residue is non corrosive, and fungus resistant. Compatible with lead free and leaded solder systems.

More information about iFixit IF145-307-4 #ad


Similar products