Kester 186 Rosin Soldering Flux 2oz Bottle, RMA No Clean Lead Free


Kester - Improves soldering performance. High preheat temperatures does not degrade solubility of the residue in normal cleaning solvents. Eliminates the need and expense of cleaning. Kester186 under mil-f-14256, was QPL approved as Type RMA. High thermal stability for soldering multi-layer assemblies which require higher temperatures.

2-ounce Bottle. The kester 186 flux pen is specifically designed for leaded and lead-free rework of conventional and surface mount circuit board assemblies.

More information about Kester

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length


NTE Electronics, Inc. SW02-10 - Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

Available with standard or anti-static bobbins. Nte solder wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.

More information about NTE Electronics, Inc. SW02-10


Similar products



Kester 959T Soldering Flux 2oz Bottle, No Clean Lead Free


Kester 951 - There are no residues to interfere with electrical testing. No clean formula- low solids Content for LOW RESIDUE. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. 2-ounce Bottle. The extremely low solids content and nature of the activator system results in practically NO RESIDUE left on the assembly after soldering. Available with standard or anti-static bobbins. Kester 959t exhibits improved soldering performance to minimize solder bridges shorts during rework operations.

Kester 959T Soldering Flux 2oz Bottle, No Clean Lead Free - Genuine kester flux is repacked by TekLine Supply in this convenient dispenser. Kester 959t is a non-rosin organic flux that is specifically designed for rework of conventional and surface mount circuit board assemblies. Lead free - RoHS compliant. Compatible with Lead and Lead-Free Solders.

More information about Kester 951


Similar products



Thermaltronics TMT-TC-2 Lead Free Tip Tinner 20g in 0.8oz Container


Thermaltronics FBA_TMT-TC-2 - Minimal residues. Genuine kester flux is repacked by TekLine Supply in this convenient dispenser. Lead free RoHS Compliant. No-clean compatible formulation. Lead free - RoHS compliant. Compatible with Lead and Lead-Free Solders. Rapidly re-tins badly oxidised soldering iron tips. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Thermaltronics tmt-tc-2 tip tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid. Thermaltronics tmt-tc-2 tip tinners provides fast, efficient cleaning and re-tinning of blackened and highly oxidized soldering iron tips, safely and efficiently.

Thermaltronics TMT-TC-2 Lead Free Tip Tinner 20g in 0.8oz Container - No clean formula- low solids Content for LOW RESIDUE. Removes tip oxidation. Available with standard or anti-static bobbins. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. 2-ounce Bottle. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station.

More information about Thermaltronics FBA_TMT-TC-2


Similar products



Hakko 599B-02 Wire-type soldering iron tip cleaner


American Hakko Products, Inc 599B-02 - Will not reduce the tip temperature. Does not cause premature wear of soldering iron tips. The hakko 599b-02 is a replacement solder tip cleaning wire sponge. Genuine kester flux is repacked by TekLine Supply in this convenient dispenser. Removes tip oxidation. Rapidly re-tins badly oxidised soldering iron tips.

Cleans better than conventional sponges. Lead free - RoHS compliant. Compatible with Lead and Lead-Free Solders. No-clean compatible formulation. No clean formula- low solids Content for LOW RESIDUE. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Available with standard or anti-static bobbins.

Hakko 599B-02 Wire-type soldering iron tip cleaner - Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Lead free RoHS Compliant. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering. 2-ounce Bottle. No contamination risk compared to conventional tip tinners.

More information about American Hakko Products, Inc 599B-02


Similar products



Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter


Kester 24-6337-0027 - Minimal residues. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. 2-ounce Bottle. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. No clean formula- low solids Content for LOW RESIDUE.

Rosin" 44" is a high activity RA core flux designed for excellent instant wetting action, even on nickel surfaces. Lead free RoHS Compliant. Lead free - RoHS compliant. Compatible with Lead and Lead-Free Solders. Core size: 66. Available with standard or anti-static bobbins. Removes tip oxidation. No water required.

Kester 24-6337-0027 Solder Roll, Core Size 66, 63/37 Alloy, 0.031" Diameter - Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Does not cause premature wear of soldering iron tips. No contamination risk compared to conventional tip tinners. Per j-std-004b, " 44" is classified as Rom1 flux. Will not reduce the tip temperature.

More information about Kester 24-6337-0027


Similar products



Kester 24-6337-0010 44 Rosin Core Solder 63/37 .020 1 lb. Spool


Kester 24-6337-0010 - Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Industry standard for decades. Composition: 63 percent tin, 37 percent lead. Does not cause premature wear of soldering iron tips. Lead free RoHS Compliant. High activity rosin core formulation. Kester 44 rosin flux is an activated rosin formula for use in flux-cored solder wire.

Removes tip oxidation. No contamination risk compared to conventional tip tinners. No-clean compatible formulation. The high mobility and fast-spreading action of this flux results in more reliable production line soldering. Excellent solderability to a wide variety of metallization's. 2-ounce Bottle. Will not reduce the tip temperature.

Kester 24-6337-0010 44 Rosin Core Solder 63/37 .020 1 lb. Spool - Rapidly re-tins badly oxidised soldering iron tips. Cleans better than conventional sponges. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. No water required. Kester 44 rosin flux has virtually dominated the field of activated rosin core solders for well over four decades.

More information about Kester 24-6337-0010


Similar products



SRA Rosin Paste Flux #135 in a 2 oz Jar


SRA Soldering Products FLS135 - Available with standard or anti-static bobbins. Excellent solderability to a wide variety of metallization's. Contains 2 ounce in a "hockey Puck" jar. Lead free - RoHS compliant. Compatible with Lead and Lead-Free Solders. Leaves bright/shiny solder joints after reflow. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.

Does not cause premature wear of soldering iron tips. Industry standard for decades. Formulated for use with tin/lead and lead-free alloys. Core size: 66. Standard core 66 3. 3 percent flux. Genuine kester flux is repacked by TekLine Supply in this convenient dispenser. Will not reduce the tip temperature. Composition: 63 percent tin, 37 percent lead.

SRA Rosin Paste Flux #135 in a 2 oz Jar - Lead free RoHS Compliant. Removes tip oxidation. High activity rosin core formulation. 2-ounce Bottle.

More information about SRA Soldering Products FLS135


Similar products



KESTER SOLDER 32117 24-6040-0027 60/40 Stand, 0.031" Diameter,"44", 1.5"


KESTER SOLDER 32117 - Lead free - RoHS compliant. Compatible with Lead and Lead-Free Solders. Composition: 63 percent tin, 37 percent lead. Available with standard or anti-static bobbins. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Per j-std-004, ""44"" is classified As Rom1 Flux.

Type: wire• alloy: 60/40 60% tin, 40% lead• description/Function: Wire Solder• Diameter: 0031" 1. 57 mm• core size: 66• contains lead: yes• package type: Spool• Weight: 1 Lb Also Available In Diameter Size 0062"". Standard core 66 3. 3 percent flux. Type: Wire. 0031 inch. Rapidly re-tins badly oxidised soldering iron tips.

KESTER SOLDER 32117 24-6040-0027 60/40 Stand, 0.031" Diameter,"44", 1.5" - Cleans better than conventional sponges. High activity rosin core formulation. Will not reduce the tip temperature. Leaves bright/shiny solder joints after reflow.

More information about KESTER SOLDER 32117


Similar products



Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft.


ITW CHEMTRONICS 10-50L - Rapidly re-tins badly oxidised soldering iron tips. Cleans better than conventional sponges. Standard core 66 3. 3 percent flux. No clean formula- low solids Content for LOW RESIDUE. Will not reduce the tip temperature. Price for: each braid material: copper width: 2. 5mm length: 50ft braid color: blue leaded Process Compatible: Yes Roll Length: 50ft RoHS Compliant: Yes.

Lead free - RoHS compliant. Compatible with Lead and Lead-Free Solders. No contamination risk compared to conventional tip tinners. No-clean compatible formulation. 0031 inch. Removes tip oxidation. Minimal residues. Composition: 63 percent tin, 37 percent lead. Core size: 66. Alloy: 60/40 60% tin, 40% Lead. Excellent solderability to a wide variety of metallization's.

Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft. - Formulated for use with tin/lead and lead-free alloys.

More information about ITW CHEMTRONICS 10-50L


Similar products



Tools & Harware 8310000186 Kester 186 Soldering Flux Pen


Kester 8310000186 - Core size: 66. Formulated for use with tin/lead and lead-free alloys. Industry standard for decades. No clean formula- low solids Content for LOW RESIDUE. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes.

No contamination risk compared to conventional tip tinners. Exposure to high preheat temperatures does not degrade solubility of the residue in normal cleaning. Alloy: 60/40 60% tin, 40% Lead. Lead free RoHS Compliant. Does not cause premature wear of soldering iron tips. Rapidly re-tins badly oxidised soldering iron tips.

Tools & Harware 8310000186 Kester 186 Soldering Flux Pen - Cleans better than conventional sponges. Made in United States. High activity rosin core formulation. Will not reduce the tip temperature. Manufactured by Kester. Classified as Rol0 per j-std-004.

More information about Kester 8310000186


Similar products