Top 10 1/0 Welding Cable 100ft – Welding Cable

As an Amazon Associate I earn from qualifying purchases.

1. Spartan Power

#ad

Spartan Power 1/0 AWG 100 Foot Red Welding Lead & Battery Cable Copper Wire by Royal Excelene

#ad
Spartan Power #ad - Paper separator for ease of stripping. Annealed rope-stranded class k, bare copper conductor as per ASTM B-3. Conductor stranding: 1026 strands, made in the USA. Buy american, Nominal OD: 0525", buy Spartan. Now on amazon! spartan power extra flexible welding cable is rated up to 600 volts, -58°F to +221°F. National electric code nec article 630 Electric Welders, RoHS Compliant & lead-free, silicone-free. Flexible epdm jacket resistant to heat, tear, abrasion, moisture & oil.30 awg rope lay strand per ASTMB-172.
BrandSpartan Power #ad
ManufacturerSpartan Power #ad
Part NumberWELD1/0AWG100FTRED
ModelWELD1/0AWG100FTRED

2. EWCS

#ad

100 Feet, Back, Made in the USA, EWCS 1/0 Gauge Premium Extra Flexible Welding Cable 600 Volt

#ad
EWCS #ad - Highly flexible 30 guage copper stranding. Water Resistant. Ships as a coil. Sunlight Resistant. Specially packaged and printed by EWCS to assure quality.
BrandEWCS #ad
ManufacturerEWCSSPEC #ad
Part Number1/0AWGWELDINGBLK

3. Excelene, Tweco

#ad

1/0 Cable, Welding Lead Package, Electrode Holder, 1-GC300, Lugs Set 1-A316, 2-2AF, Ground Clamp, 1set- 2MPC1, 100ft-1/0, 100'

#ad
Excelene, Tweco #ad - Tweco 300 amp Ground Clamp. Tweco 250 amp Electrode Holder. 2 ea tweco 2-AF Lugs. 100 ft welding cable - Size 1/0 Gauge. Tweco 2-mpc-1 Cable Connectors.
BrandExcelene, Tweco #ad
ManufacturerExcelene, Tweco #ad
Part NumberTweco A-316, GC-300, 2-AF, 2-MPC-1
ModelTweco A-316, GC-300, 2-AF, 2-MPC-1

4. TEMCo Industrial

#ad

50' Red 1/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire Black + RED | Made in USA, TEMCo INDUSTRIAL WC0054-100' 50' Blk

#ad
TEMCo Industrial #ad - Resistant to cuts, water, Oil, Abrasion, tears, Grease and Flame.285 max amps up to 50 feet, rated up to 600 volts, -50°c to +105°C -58°F to +221°F. Annealed 30 gauge bare copper conductor. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Rohs Compliant. Nominal od: 0526", conductor stranding: 975/44. Temco easy-flex has a rugged epdM jacket and is highly flexible.
BrandTEMCo Industrial #ad
ManufacturerTEMCo #ad
Length100 Feet
Weight0 Pounds
Part NumberWC0054

5. Flex-A-Prene

#ad

Made in USA 100 FEET, Welding/Battery Cable, Flex-A-Prene®, 600 V, 1/0 Gauge AWG, Red

#ad
Flex-A-Prene #ad - Meets sae j1127 - rohs compliant - vw-1 flame test as per ul2556 - suitable for battery cable per UL558 & UL583 - National Electrical Code article 630 electric welders.

Conductors: highly flexible class k 30 gauge copper - insulation: edpm jacket and paper separator - TEMP RANGE: -50°C to +105°C -58°F to 221°F - Rated 600 Volts. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, flame, cut, tear, grease, oil and water. O. D: 0526" - wall tickness: 008" - made in the USA. You will recieve 100 feet of AWG Gauge 1/0 Red Welding Cable.
BrandFlex-A-Prene #ad
ManufacturerDirect Wire & Cable #ad
Weight38 Pounds
Part NumberFP1758_100

6. WeldingCity

#ad

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

#ad
WeldingCity #ad - Zinc-plated steel 300-amp work clamp with strong spring, copper braid, copper plated jaw, copper plated hex screw for secured cable connection. Resistant to chemicals, ozone and sunlight resistant. Usa-made 2 awg heavy duty welding cable epdm rubber jacketed black cover for use where maximum flexibility and resistance to cuts, and acids and is also weather, abrasion is required.

Welding cable set with dinse plug includes: 2-awg usa-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug 1/2" stud hole and two Dinse-type 35-50mm male connectors. Welding cable set with terminal lug includes: 2-awg usa-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs 1/2" stud hole.

Strong technical support with experienced customer service to address buyer's any question. Heavy duty 300-amp stick electrode holder with strong jaw spring; both upper and lower jaws made of copper brass with increased operator comfort. Based welding and hardware supplier. Accepts cables awg #2-1/0 nominal cable area 35-50mm². Available welding cable sets: welding cable only; cable set with terminal lugs and cable set with Dinse connectors. Dinse-type twist-lock cable connector male with heat and oil resistant covers and accessories; 1/2" 12.
BrandWeldingCity #ad
ManufacturerWeldingCity.com #ad
Height2 Inches
Length12 Inches
Weight400 ounces
Width12 Inches
Part NumberWCS-2AWG-100FT

7. Flex-A-Prene

#ad

Black, Made in USA 100 FEET, #1 Gauge AWG, Welding/Battery Cable, Flex-A-Prene®, 600 V

#ad
Flex-A-Prene #ad - O. D: 0481" - wall tickness: 008" - made in the USA. Meets sae j1127 - rohs compliant - vw-1 flame test as per ul2556 - suitable for battery cable per UL558 & UL583 - National Electrical Code article 630 electric welders.

Conductors: highly flexible class k 30 gauge copper - insulation: edpm jacket and paper separator - TEMP RANGE: -50°C to +105°C -58°F to 221°F - Rated 600 Volts. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, cut, grease, flame, tear, oil and water. You will recieve 100 feet of AWG Gauge #1 Black Welding Cable.
BrandFlex-A-Prene #ad
ManufacturerDirect Wire & Cable #ad
Weight0 Pounds
Part NumberFP0348_100

8. Flex-A-Prene

#ad

600 V, Welding/Battery Cable, #1 Gauge AWG, Made in USA 100 FEET OF EACH COLOR, Black & Red, Flex-A-Prene®

#ad
Flex-A-Prene #ad - You will recieve 100 feet of gauge #1 black + 100 Feet of Gauge #1 Red, Welding Cables. Information on cable is ident marked so it doesn't fade with time for a better identification even after years of use - Resists abrasion, flame, grease, tear, cut, oil and water.

Meets sae j1127 - rohs compliant - vw-1 flame test as per ul2556 - suitable for battery cable per UL558 & UL583 - National Electrical Code article 630 electric welders. O. D: 0303" - wall tickness: 006" - made in the USA. Conductors: highly flexible class k 30 gauge copper - insulation: edpm jacket and paper separator - TEMP RANGE: -50°C to +105°C -58°F to 221°F - Rated 600 Volts.
BrandFlex-A-Prene #ad
ManufacturerDirect Wire & Cable #ad
Weight61 Pounds
Part NumberFP0348-0350_100

9. WindyNation

#ad

Battery Cable, Inverter, WINDYNATION Red and Black Welding Lead & Car Battery Copper Cable Wire 1/0 AWG 1/0 Gauge, Car, RV, Solar

#ad
WindyNation #ad - Please refer to the photo gallery for a technical specification chart amperage, insulation and copper thickness, voltage, stranding, etc. Pure copper cable. High grade epdm insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents. Iec and roHS compliant. Copper cable is fully annealed per ASTM standards. High stranding cable count combined with EPDM insulation results in a very flexible cable.
BrandWindyNation #ad
ManufacturerWindyNation #ad
Part NumberCBL-CSRD-10-20

10. WindyNation

#ad

Car, Solar, RV, Inverter, 1/0 Gauge 1/0 AWG 25 Feet Black + 25 Feet Red Welding Battery Pure Copper Flexible Cable Wire

#ad
WindyNation #ad - Complies with SAE J1127. Refer to the photo gallery for a detailed specification chart. Iec and roHS compliant. Windynation power-flex cable is fully annealed pure copper, flexible high copper strand count, with a tough, solvent resistant EPDM insulation jacket.

Available in 8 Gauge through 4/0 Gauge. Rated up to 600 volts, -50°c to +105°c -58°F to +221°F. Copper cable is fully annealed per ASTM standards. Please refer to the photo gallery for a technical specification chart amperage, stranding, voltage, insulation and copper thickness, etc. Use selection tabs above to select 1 cable gauge size and 2 cable length and insulation color.
BrandWindyNation #ad
ManufacturerWindyNation #ad
Part Number1-0-AWG-25B-25R