Top 10 1/4 Fuel Line Tee – Automotive Replacement Fuel System Fittings

As an Amazon Associate I earn from qualifying purchases.

1. Dorman

#ad

Dorman 55106 1/4 In. Brass Tee Connector

#adDorman #ad - Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool. A necessary safety item for preventing fuel leaks. Differently sized tees available to fit hoses of various sizes. Replacement restores a tight connection between fuel lines. Conveniently packaged in a variety of piece counts to assist with both small and large projects.

Brand	Dorman #ad
Manufacturer	Dorman Products #ad
Height	5.5 Inches
Length	1.1 Inches
Weight	0.03 Pounds
Width	1.75 Inches
Part Number	55106
Model	55106
Warranty	Limited Lifetime Warranty

2. Dorman

#ad

Dorman 55109 1/4 In., 5/16 In. And 3/8 In. Brass Tee Connector Assortment, 3 Pack

#adDorman #ad - Conveniently packaged in a variety of piece counts to assist with both small and large projects. Differently sized tees available to fit hoses of various sizes. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool. Replacement restores a tight connection between fuel lines. A necessary safety item for preventing fuel leaks.

Brand	Dorman #ad
Manufacturer	Dorman Products #ad
Height	8.27 Inches
Length	1.77 Inches
Weight	0.15 Pounds
Width	5.51 Inches
Part Number	55109
Model	55109
Warranty	Limited Lifetime Warranty

3. autoBbox

#ad

8AN Flare to 1/4 NPT male Hose Union Fitting with 1/8 NPT Pressure Side Port, Fuel Line Tee Pipe Adapter Aluminum Black

#adautoBbox #ad - Made of high performance lightweight 6061-T6 CNC Machined Billet Aluminum Material. 8 an male flare to 1/4 npt male thread hose union tube connector with 1/8 inch NPT thread side port, str. Universal fit such as: oil/ Gas/ Fuel/ Water/ Fluid/ Air Line. Black anodized finish for Durability, Long Last and Strength. Al alloy hard anodized 37 degree hex/hexagon Head -8AN Male sae Thread Fuel Flowing Pressure Tubing / Pipe Adaptors.

Brand	autoBbox #ad
Manufacturer	autoBbox #ad
Part Number	WFP194-08-04-blk

4. autoBbox

#ad

Fit for 1/4" OD Nylon Tube/Gas Line Pack of 2, Fuel Line Tee Connector for 1/4 OD Nylon Tubing Hose Union T Quick Connect

#adautoBbox #ad - Highly resistant to the Extreme Temperatures. Easy to install, Long Working Life. Save time and money by repairing only the damaged section, not the entire fuel line. Connector size: 1/4 id quick tee connector straight, pack of 2 pcs. Fit for 1/4 inch OD nylon tubing hose / gas line. Connect nylon line to nylon line.

Brand	autoBbox #ad
Manufacturer	autoBbox #ad
Part Number	ZJPE-6

5. MEASUREMAN

#ad

MEASUREMAN Fuel Line Fuel Pressure Adapter Brass T-Fitting, 1/8"NPT Female With Teflon Tape Suitable For Fuel Pressure Gauge Or Sensor

#adMEASUREMAN #ad - The hose clamps are made of zinc plated steel that provide maximum corrosion resistance to salt and most chemicals. Stainless steel Clamp With Handle Easy to install. Packing including: 2 brass barbed Fittings 5/16"8mm ，2 stainless steel clamp with handle and Teflon tape. Features 8mm 5/16" barbed fittings, 1/8-27 npt female thread Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps to Secure Fuel Line to T-Fitting. Fuel line fuel pressure t-fitting Adapter Allows Users to Install a Fuel Pressure Sensor to the Fuel Line.

Brand	MEASUREMAN #ad
Manufacturer	MEASUREMAN #ad
Part Number	MD008

6. CocoMocart

#ad

CocoMocart 9.85-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

#adCocoMocart #ad - Package includes:9. 8 feet3m 1/4" id fuel line, 20 X 2/5" ID Hose Clamps. Designed for conveying gasoline, E-85, and bio-diesel, diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines.

The fuel lines are oil resistant, cold-resistant and ethanol tolerance;Custom Extra long 9. 8 foot length 3m can be cut to size for all your applications. For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control. Fuel line:1/4 inch inside diameter 064 cm and 1/3 inch outside diameter 08cm；hose clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches.

Brand	CocoMocart #ad
Manufacturer	Cococart #ad
Part Number	CBF020040PN
Model	2

7. X AUTOHAUX

#ad

X AUTOHAUX 4mm Hose Barb Brass 3 Way Tee Connector Adaptor for Air Water Gas Oil Pipe 5pcs

#adX AUTOHAUX #ad - Relative softness of brass threading when compared to other metals allows for a tight seal. Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule. Note:please confirm the shape and size before payment. Hose fittings can connect, control, change the direction and terminate the flow in piping and hose systems. Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Brand	X AUTOHAUX #ad
Manufacturer	X AUTOHAUX #ad
Part Number	a19041800ux0596

8. IZOKEE

#ad

IZOKEE 1/4" Inch ID Fuel Line Set, 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine

#adIZOKEE #ad - Oil resistant, cold-resistant and ethanol tolerance. Fuel filterfilter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power. You do not need to purchase those part extra.

The dimensions of the various components within the kit are 100% compatible! 3-layer thickened fuel linethe fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. Fuel filters and hose clamps are required for the use of fuel line. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Upgraded setthe izokee package includes 6 feet 1/4" id fuel line; 2 x 1/4" in-line fuel filters; 10 x 2/5" id hose clamps.

6 foot / 2 m hose can be cut to size for all your applications. Wall thickness is 2. 94mm. Wide applicationfits selected briggs & stratton, lawnmower, Gravley, Kubota engines that use this type filter for motorcycle, Kawasaki, Husqvarna, Oregon, Stens, Simpson, Kohler, Craftsman, john deere, power equipment and small engines ect. Tight clamping force prevents liquid leakage. Hose clampsmade of 65mn spring Steel, durable and can be reused.

Brand	IZOKEE #ad
Manufacturer	IZOKEE #ad
Part Number	IZKE-FLCF
Model	IZKE-FLCF

9. LDR Industries

#ad

¼ Inch ID Fuel Line for Small Engines 6-Foot Length

#adLDR Industries #ad - Inch inside diameter. 64 cm and ½ inch outside diameter 1. 27. American made high quality rubber hose max 60 PSI @ 70 F Max Temperature of 257F/93C. For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control. For use in mowers tractors snow blowers dirt bikes and just about all small engines. Custom extra long 6 foot Length 1. 82 can be cut to size for all your applications.

Brand	LDR Industries #ad
Manufacturer	LDR Industries #ad
Height	8 Inches
Length	1.25 Inches
Weight	0.21 Pounds
Width	9 Inches
Part Number	516 JF146

10. GlowShift

#ad

1/8-27 NPT Sensor Port, GlowShift 3/8” Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter, Fits Hose with 9.5mm ID Inner Diameter, 304 Stainless Steel, Includes Clamps

#adGlowShift #ad - Manufactured from 304 Stainless Steel that Prevents Corrosion. Includes step-By-Step Installation Instructions. Features 3/8" 9. 5mm i. D barbed push lock fittings, 1/8-27 NPT Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps. Glowshift guarantee with One Year Limited Warranty & Free Lifetime Technical Support. Glowshift 3/8” fuel line fuel pressure barbed push lock t-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to a 3/8" Inner Diameter Fuel Line.

Brand	GlowShift #ad
Manufacturer	GlowShift Gauges #ad
Height	0 Inches
Length	0 Inches
Width	0 Inches
Part Number	GS-FA-FLA-38
Model	GS-FA-FLA-38