As an Amazon Associate I earn from qualifying purchases.
The performance chip is fully compatible with your Ford F-150 in all trims, 5. 8l and 6. 2l engines. We strived to create the most high quality product in every aspect, delivering you the most affordable product without sacrificing quality.








Dyno tested: dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required. Ultimate longevity: 10-year/Million Mile Limited Warranty protects for the life of your vehicle.
Easy to install: bolt-on power in less than an hour with basic hand tools. Improved engine sound: Hear the power under the hood. Guaranteed increase in horsepower: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube. Easy maintenance: no filter cleaning required for up to 100, 000 miles. High quality: Made in America.

1. Innovative Performance Chips
#ad
4.9L, 3.3L, 3.5L, Add HP!, 3.7L, 4.2L, 5.8L and 6.2L, Save Gas & Gain MPG, 3.0L, 4.6L, 5.4L, Innovative Performance Chip/Power Programmer compatible with Ford F-150 2.7L EcoBoost, 5.0L, 3.5L EcoBoost
#adInnovative Performance Chips #ad - It's a thousand tiny details that add up to something big. All performance chips feature a high-end aluminum enclosure with an extremely durable, high quality anodized finish.The performance chip is fully compatible with your Ford F-150 in all trims, 5. 8l and 6. 2l engines. We strived to create the most high quality product in every aspect, delivering you the most affordable product without sacrificing quality.
More information #ad
All performance chips are proudly backed by our unmatched 100% Money-Back Guarantee & Lifetime Warranty! A properly maintained vehicle is required for the performance chip to function as intended and advertised. Results may vary. Makes no permanent changes to your vehicle's computer! it will not void your factory warranty, 4. 6l, 3. 5l, 3. 0l, 5. 0l, 3. 5l ecoboost, 4. 2l, 3. 3l, 5. 4l, including the 2.Brand | Innovative Performance Chips #ad |
Manufacturer | Innovative Performance Chips #ad |
Height | 6 Inches |
Length | 8 Inches |
Weight | 0.31 Pounds |
Width | 0.5 Inches |
Part Number | INV-FORD-F150 |
Model | INV-FORD-F150 |
More information #ad
2. aFe Power
#ad
3-Layer Filter, aFe Power 51-32112-B Magnum Force Ford F-150 EcoBoost Performance Intake System Dry
#adaFe Power #ad - 3-layer non-oiled, washable synthetic media for the perfect balance of performance, protection and convenience. Powder-coated one piece heat shield utilizes stock mounting locations.More information #ad
This product is 50-state legal CARB E. O number d-550-28. Plastic cad designed, dyno-tuned, roto-molded intake tube. Outflows the factory intake by up to 70%.Brand | aFe Power #ad |
Manufacturer | AFE POWER #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.1 Pounds |
Width | 0 Inches |
Part Number | 51-32112-B |
Model | 51-32112-B |
More information #ad
3. aFe Power
#ad
5-Layer Filter, aFe Power 54-32112-B Magnum Force Ford F-150 EcoBoost Performance Intake System Oiled
#adaFe Power #ad - Powder-coated one piece heat shield utilizes stock mounting locations. This product is 50-state legal CARB E. O number d-550-28. Outflows the factory intake by up to 70%.More information #ad
5-layer progressively finer oiled, washable cotton gauze media allows maximum airflow for maximum power. Plastic cad designed, dyno-tuned, roto-molded intake tube.Brand | aFe Power #ad |
Manufacturer | Advance Flow Engineering #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.1 Pounds |
Width | 0 Inches |
Part Number | 54-32112-B |
Model | 54-32112-B |
More information #ad
4. Mishimoto
#ad
Mishimoto MMRAD-F150-11 Aluminum Radiator Compatible With Ford F150 EcoBoost 2011-2014
#adMishimoto #ad - 102% increase in surface area over stock heavy-duty radiator. Mishimoto Lifetime Warranty. Direct-fit for 2011-2014 Ford F-15060% increase in core volume over stock heavy-duty radiator. 150% increase in coolant capacity over stock heavy-duty radiator.More information #ad
Brand | Mishimoto #ad |
Manufacturer | Mishimoto #ad |
Height | 24 Inches |
Length | 48 Inches |
Weight | 23 Pounds |
Width | 9 Inches |
Part Number | MMRAD-F150-11 |
Model | MMRAD-F150-11 |
Warranty | Lifetime Warranty |
More information #ad
5. aFe Power
#ad
5-Layer Filter, aFe Power Magnum FORCE 54-12192 Ford F-150 EcoBoost Performance Cold Air Intake System Oiled
#adaFe Power #ad - X ft. Heat shield snaps onto the lower half of the factory air box. Outflows the factory intake by up to 44%. This product is 50-state legal CARB E. O number d-550-15.More information #ad
5-layer progressively finer oiled, washable cotton gauze media allows maximum airflow for maximum power. Torque max gains. Black equal length dual tube design with H-pipe balance-tube. Produces an additional 32 horsepower and 35 lbs.Brand | aFe Power #ad |
Manufacturer | AFE Filters #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 12 Pounds |
Width | 0 Inches |
Part Number | 54-12192 |
Model | 54-12192 |
More information #ad
6. aFe Power
#ad
3-Layer Filter, aFe Power Magnum FORCE 51-12192 Ford F-150 EcoBoost Performance Cold Air Intake System Dry
#adaFe Power #ad - Outflows the factory intake by up to 44%. This product is 50-state legal CARB E. O number d-550-15. Black equal length dual tube design with H-pipe balance-tube. X ft.More information #ad
Produces an additional 32 horsepower and 35 lbs. 3-layer non-oiled, washable synthetic media for the perfect balance of performance, protection and convenience. Torque max gains. Heat shield snaps onto the lower half of the factory air box.Brand | aFe Power #ad |
Manufacturer | AFE #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 15 Pounds |
Width | 0 Inches |
Part Number | 51-12192 |
Model | 51-12192 |
More information #ad
7. Mishimoto
#ad
Black, Mishimoto MMINT-F150-11KBBK Performance Intercooler Kit Compatible With Ford F-150 EcoBoost 2011-2014 Black
#adMishimoto #ad - 50�f 28�c reduction in AIT. 66% increase in internal core volume and 40% increase in external fin surface area. Includes air diversion plates to direct air through the intercooler core for maximum efficiency. Direct fit for the 2011-2014 Ford F-150 EcoBoost. 88% increase in core size.More information #ad
Brand | Mishimoto #ad |
Manufacturer | Mishimoto #ad |
Height | 10 Inches |
Length | 24 Inches |
Weight | 68 Pounds |
Width | 18 Inches |
Part Number | MMINT-F150-11KBBK |
Model | MMINT-F150-11KBBK |
Warranty | Lifetime Warranty |
More information #ad
8. ACCEL
#ad
2010-2016 Ford EcoBoost 3.5L V6, Supercoil, 6-Pack 3-Pin, Black, ACCEL 140646K-6 Ignition Coil
#adACCEL #ad - Up to 15% more spark energy than OEM coils. Fit type: Universal. Maximizes fuel mileage. High temperature vacuum applied epoxy resists shock and vibration.More information #ad
Brand | ACCEL #ad |
Manufacturer | ACCEL #ad |
Height | 9.99 Inches |
Length | 9.99 Inches |
Weight | 2.66 Pounds |
Width | 9.99 Inches |
Part Number | 140646K-6 |
Model | 140646K-6 |
More information #ad
9. K&N
#ad
K&N Cold Air Intake Kit: High Performance, 3.5L V6,57-2583, Guaranteed to Increase Horsepower: 50-State Legal: Fits 2011-2014 Ford F150
#adK&N #ad - World class protection: Pushing the limits of engine protection by protecting your engine from harmful contaminants. K&n air intake systems are one of the easiest ways to guarantee an increase in horsepower.Dyno tested: dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required. Ultimate longevity: 10-year/Million Mile Limited Warranty protects for the life of your vehicle.
More information #ad
Trusted on the racetrack—made for your vehicle. Racetrack approved: the official Air Filter of NASCAR. Better towing: improves acceleration and uphill performance when towing by improving throttle response. Easy to install: bolt-on power in less than an hour with basic hand tools. Improved engine sound: Hear the power under the hood. Guaranteed increase in horsepower: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube. Easy maintenance: no filter cleaning required for up to 100, 000 miles. High quality: Made in America.
Brand | K&N #ad |
Manufacturer | K&N Engineering #ad |
Height | 15.75 Inches |
Length | 24.41 Inches |
Weight | 11.99 Pounds |
Width | 20.08 Inches |
Part Number | 57-2583 |
Model | 57-2583 |
Warranty | LIMITED WARRANTY |
More information #ad
10. MSD Ignition
#ad
MSD Ignition Coil
#adMSD Ignition #ad - Product type: Auto Accessory. Package Quantity: 1. Package dimensions: 7. 366 cms l x 27. 94 cms w x 33. 02 cms H. Country of Origin: China.More information #ad
Brand | MSD Ignition #ad |
Manufacturer | MSD Ignition #ad |
Height | 3 Inches |
Length | 13 Inches |
Weight | 3.75 Pounds |
Width | 11 Inches |
Part Number | 82576 |
Model | 82576 |
Warranty | Manufacturer Warranty |
More information #ad