Top 10 BTR Stage 4 Truck Cam Kit – Automotive Replacement Engine Camshafts

As an Amazon Associate I earn from qualifying purchases.

1. Michigan Motorsports

#ad

Brian Tooley Racing BTR Truck Stage 3 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

#ad
Michigan Motorsports #ad - An aftermarket converter is highly recommended with this grind. Excellent for 4. 8 5. 3 6. 0 6. 2 silverado, sierra, but gain an idle note that is distinctly BTR! Stage 3 grind, Suburban, it is still a tow-friendly camshaft, Escalade.

Brian tooley racing btr stage 3 truck cam, beehive Springs and 7. 400" chromoly Pushrods 4. 8 5. 3 6. 0 The brian tooley vortec racing truck cam kit includes: stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.4400 chromoly Pushrods. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, Tahoe, Yukon, just not ideal for the everyday hauler.

Stage iii camshaft specs specs: 218/224. 553”/. 553” 110 requires a 3 bolt timing gear. Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. Stage 3 specifics: the stage 3 v2 camshaft is an amazing all around grind for the truck enthusiast.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Part NumberA7500+A6400+A6500+72400

2. Michigan Motorsports

#ad

Springs and Gasket Kit, Texas Speed TSP Stage 3 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0,Includes GM LS6 Single Beehive Valve Springs, Set of 16 and Gasket Set Kit Camshaft

#ad
Michigan Motorsports #ad - This cam gained 53. 4 hp and 22. 0 tq at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5. 3l engine! this cam uses proprietary tsp lobe profiles that are designed to utilize the factory gm ls6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market! 1400-6000 rpm power band; this is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.



And crank bolt & gaskets for water pump, timing cover,. 550"/. 550" camshaft 112 LSA Camshaft. With a 112 lobe Separation Angle LSA. These camshafts have a 3-bolt timing gear pattern. These cams are designed specifically for 4. 8 5. 3 6. 0 combinations. Beehive valve Springs, & Front Seal.
BrandMichigan Motorsports #ad
ManufacturerTexas Speed #ad
Part NumberTSP 25-TSPLL216220

3. Michigan Motorsports

#ad

Brian Tooley Racing BTR Turbo LS Stage 4 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

#ad
Michigan Motorsports #ad - Pushrod specs are: 7. 400" long 5/16 chromoly. 080 wall pushrods by Brian Tooley Racing. Cam specs are 234/239. 612"/. 610" 115+5 and comes a 3 bolt timing gear pattern. Brian tooley camshaft,. 660 lift springs with Lightweight Titanium Retainers, and 7. 400 chromoly Pushrods. The big stick of the turbo cams!! Spring specs are: 660" lift dual spring kit for ls engines using stock rocker arms. Includes dual polished springs, Locators for stock guides, matching lightweight Titanium Retainers faster reving than steel, locks and seals. Highly recommended when upgrading Camshafts.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Part NumberBTR 33439155 +CK/T001/7400312/TBO4

4. Michigan Motorsports

#ad

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Valve Seals

#ad
Michigan Motorsports #ad - Brian tooley racing btr truck stage 2 camshaft Kit 4. 8 5. 3 6. 0 camshaft and Beehive Springs and Valve Seals. Specs are 212/218. 553/. 553 111.

This is the largest cam we recommend to run with stock 4L60E converter in a 4. 8/5. 3. The brian tooley vortec racing truck cam Kit includes: Stage 2 Truck Cam, Beehive Springs and LS Hat Seals. These vortec truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available. The stage ii cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Part NumberBTR TRUCK CAM KIT stage 2

5. Michigan Motorsports

#ad

Brian Tooley Racing BTR Truck Stage 4 Cam 4.8 5.3 6.0 GM LS Camshaft

#ad
Michigan Motorsports #ad - Requires a 3 bolt cam gear. These truck cams were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available. Brian tooley racing truck stage 4 Cam LS 4. 8 5. 3 6. 0 Also used in 6. 0 and 6. 2 truck engines. Specs are 224/230553"/. 553" 109. Has made 370 in a LS1 Camaro. Requires around a 3000-3200 converter.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Part NumberBTR 32430112

6. Michigan Motorsports

#ad

Brian Tooley Racing BTR Truck Stage 3 Cam Camshaft 4.8 5.3 6.0 6.2…

#ad
Michigan Motorsports #ad - Requires a 3 bolt cam gear. Made right here in the USA! The maximum heat treat depth is achieved by having cam cores made within a few thousandths of final grind size, each grind has their own respective core.

Now, higher peak power, and more durability than anyone else in the industry. Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. The end result is a revised camshaft that provides more average torque, as opposed to grinding all the camshafts from the same starting core. Our truck cams were designed with low lift so gm ls2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.

110 btr is proud to introduce the next chapter in the performance GM Truck saga. An aftermarket converter is highly recommended with this grind. Specs: 218/224. 553”/. 553” 110 stage 3 specifics: the stage 3 camshaft is an amazing all around grind for the truck enthusiast. Brian tooley racing truck stage 3 Cam LS 4. 8 5. 3 6.
BrandMichigan Motorsports #ad
ManufacturerBrian Tooley Racing #ad
Part NumberA7500

7. Michigan Motorsports

#ad

Texas Speed TSP 228R 228/228 .600"/.600" Camshaft, and Gasket Set, Spring Kit, Chromoly Pushrods, and Gasket Set. 4.8 5.3 5.7 6.0 LS Cam Camshaft, Spring Kit

#ad
Michigan Motorsports #ad - Tuning will also be required in both automatic & manual applications. The lower lsA also creates a slightly rougher idle. Dyno testing has shown the 228r camshaft to make a solid 45-50rwhp gains.

The 228r camshaft is large enough that we recommend a larger than stock stall converter in automatic cars. The 112lsa helps to bring the camshafts powerband lower in the rpm band. Includes tsp. 660" dual spring kit w/ pac racing polished springs, timing cover, Crank Bolt & Gaskets for Water Pump, Hardened Spring Seats, Titanium Retainers, and New Valve Stem Seals, & Front Seal. Texas speed tsp 228r 228/228. 600"/. 600" 112 lsa camshaft 4. 8 5. 3 5. 7 6. 0 ls cam. The 228r camshaft is a very popular camshaft for customers wanting a very streetable camshaft that makes approximately 5-7 more horsepower than the 224R camshaft.
BrandMichigan Motorsports #ad
ManufacturerTexas Speed #ad
Part NumberTSP 25-TSP228R6

8. Michigan Motorsports

#ad

Brian Tooley Racing BTR Truck Stage 3 Cam and Beehive Spring Kit 4.8 5.3 6.0 Fits Silverado Sierra Vortec

#ad
Michigan Motorsports #ad - Specs are 218/224. 553/. 553 113+3. It will make even more average torque than the Stage II cam, at the sacrifice of some low end torque and fuel mileage. These vortec truck cams require a 3-bolt timing gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.

The brian tooley racing truck cam kit includes: Stage 3 Truck Cam, Beehive Racing Springs and Set of VS LS Hat Seals. Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. Brian tooley racing btr truck stage 3 cam kit 4. 8 5. 3 6. 0 camshaft, beehive Springs and LS Valve Seals. The stage iii cam has a noticeable cam sound that so many are looking for.
BrandMichigan Motorsports #ad
Manufacturermichigan Motorsports #ad
Part NumberBTR TRUCK CAM KIT stage 3

9. Michigan Motorsports

#ad

Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 Camshaft

#ad
Michigan Motorsports #ad - With a 112 lobe Separation Angle LSA. This cam gained 51. 4 hp and 22. 9 tq at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5. 3l engine! this cam uses proprietary tsp lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market.

1200-5800 rpm power band; this is an excellent performance camshaft with a smooth idle! we've had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you're looking for a small, stealth camshaft the 212/218 is a great option to consider.

These cams are designed specifically for 4. 8 5. 3 6. 0 combinations. Texas speed stage 2 low lift 212/218,. 550"/. 550" 112 lsa camshaft. These camshafts have a 3-bolt timing gear pattern. It is ideal for 4. 8l and 5.
BrandMichigan Motorsports #ad
ManufacturerTexas Speed #ad
Part NumberTSP 25-TSPLL212218

10. Michigan Motorsports

#ad

Spring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2, Brian Tooley Racing BTR Turbo LS Stage 3 Cam

#ad
Michigan Motorsports #ad - Highly recommended when upgrading Camshafts. Pushrod specs are: 7. 400" long 5/16 chromoly. 080 wall pushrods by Brian Tooley Racing. Brian tooley turbo ls stage 3 camshaft,.

660 lift springs with Lightweight Titanium Retainers, and 7. 400 chromoly Pushrods. Includes dual polished springs, Locators for stock guides, matching lightweight Titanium Retainers faster reving than steel, locks and seals. Spring specs are: 660" lift dual spring kit for ls engines using stock rocker arms. When you need a little more rpm than the stage 2 can give you. Cam specs are: 230/235. 609"/. 610" 114+4 and comes a 3 bolt timing gear pattern. If you have a light car wanting to push the limits, then this is the go to cam for your 5. 3/6. 0 s400 equipped combination.
BrandMichigan Motorsports #ad
ManufacturerMichigan Motorsports #ad
Part NumberBTR 33035144 +SK001/T/0560/BB +PR7400312