Top 10 Cell Phone Mount for Car Dashboard – Computers Features

As an Amazon Associate I earn from qualifying purchases.

1. VICSEED

#ad

Thick Case & Big Phones Friendly Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Air Vent Hands Free Clip Cell Phone Holder Compatible with All Mobile Phones, VICSEED Car Phone Mount

#ad
VICSEED #ad - Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. The unprecedented design makes leaves zero scratches on mobile devices. It easily sticks securely on the dashboard or most flat surfaces. Long arm design & multiple viewing angle: the car mount for iphone 11 has a telescopic arm that extends from 4.

84" - 9. 05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. Perfect protection: say goodbye to the easy-scratched plastic panel car mount. One-hand operation: the car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation. Fit well for all mobile phones between 4''-7''in width and most thick case. Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.

Vicseed upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. Secure stable install: the vicseed car cell phone mount features an extra strong suction cup with super sticky gel pad. 3 in 1 universal car mount: vicseed car cell phone holder made with airliner ptfe material, trucks, pickup trucks, windshield or vent to meet your demand at your convenience and requirements. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height1.18 Inches
Length3.94 Inches
Weight0.73 Pounds
Width3.15 Inches
Part NumberSB-304
ModelBS-BIRD9384
Warranty30 Days

2. Loncaster

#ad

Loncaster Car Phone Holder, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, GPS Devices and More, Slip Free Desk Phone Stand Compatible with iPhone, Black, Samsung, Android Smartphones

#ad
Loncaster #ad - Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on. Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn.

Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, pixel, samsung galaxy note 8 /9/10 /10 pro/20 ultra, Mi, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, IPAD, LG, Nexus, Huawei, HTC, S 7 Edge, Sony, Garmin and so on.

Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Just rinse with water and dry it, it will be the same as the new one.
BrandLoncaster #ad
ManufacturerLoncaster #ad
Height1.8 Inches
Length4.8 Inches
Weight0.37 Pounds
Width4.8 Inches
Part Numberyx-40
Model40

3. DaJun

#ad

JunDa Car Phone Mount 360 Degree Rotation Dashboard Cell Phone Holder for Car Clip Mount Stand Suitable for 4 to 7 inch Smartphones…

#ad
DaJun #ad - More convenient, sun visor, can be used in car dashboard, rearview mirror. And firmly hold your electric device order to prevent them from scratching and dropping.

Spring buckle base can not be shaken off. The phone holder can be attached to the cat dashboard or curved surface. Strong and sturdy. One holder for multiple purposes. Broad compatibility: designed with a spring buckle, which can be adjusted to fit mobile phones from 4 to 7 inches. Curved base design, made with a soft, non-slip silicon pad and curved base. 360 degree rotation, Switch between horizontal and vertical screens at your will.
BrandDaJun #ad
ManufacturerJunDa 01 #ad
Height3.54 Inches
Length5.51 Inches
Width3.54 Inches

4. iOttie

#ad

IOttie Easy One Touch 4 Dash & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, Moto, Samsung, Smartphones, Huawei, Nokia, LG

#ad
iOttie #ad - Adjustable viewing: the newly re-designed telescopic arm extends from 4 – 6. 5 inch and pivots on 225 degree arc for a variety of optimal positions.

Universal mounting: holds all phone and case combinations from 2. 3 inches to 3. 5 inches. Strong suction: 1 time use dashboard disc and reusable suction cup combo offers superior stick strength. Bottom foot: foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes. Easy one touch lock/release: Patented easy one touch mechanism allows quick 1 hand open and close operation.
BrandiOttie #ad
ManufactureriOttie #ad
Height9 Inches
Length3 Inches
Weight0.2 Pounds
Width5 Inches
Part Number852306006596
ModelEasy One Touch 4
Warranty2 year

5. VICSEED

#ad

VICSEED Universal Cell Phone Holder for Car Phone Mount Car Phone Holder Dashboard Windshield Air Vent Long Arm Strong Suction Cell Phone Car Mount Fit with iPhone SE 12 Pro Galaxy S21 All Phones

#ad
VICSEED #ad - Find a best view for your trip. True universal cell phone holder for car super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. That is convenient to navigate, VICSEED mobile phone holder will do the rest of jobs for you. The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching.

Vicseed smartphone car mount gives you an easy and safe driving journey. One small car mount or car vent mount feeds your different usage needs. So the car holder can stay more firmly and securely. 360 degrees rotation car cell phone mount the 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places.

Multi-function cell phone holder 3 in 1 multiple functions car phone holder, pickup trucks, suv, taxis; good assistant for Uber, made with best airliner PTFE PC material, can be mounted on dashboard windshield or air vent firmly. It can stay securely in the car. You can focus on your drive, extremely flexible. You can use this mobile phone holder for car vertically or horizontally either, pickup phone calls. Apply to most of cars, trucks, Lyft drivers. Release your smart phone by pressing the left bottom release button in one second.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height2.8 Inches
Length5.98 Inches
Weight0.7 Pounds
Width4.61 Inches
Warranty1-year Manufacture Warranty

6. WixGear

#ad

Magnetic Cell Phone Mount, WixGear Universal Stick On Mount 2 Pack Dashboard Magnetic Phone Holder for Car for Cell Phones and Mini Tablets with Fast Swift-snap Technology, Magnetic Car Mount

#ad
WixGear #ad - This universal magnetic holder produces an intensive force of attraction that will hold any smartphone. Complementary wixgear designs: the complementary design of the magnetic mount is one that fits into the back of any smartphone. Including android, Apple, Blackberry and Microsoft devices.

Wixgear sturdy base: the high quality rubber construction of the base of the mount is unique and very functional as well. Swivels your display: rotate your smartphone and swivel your display as you please. It guarantees that the base of the mount will solidly hold the magnetic head of the mount, to help keep your smartphone in place, regardless of road vibrations or impacts. Will not block the air vents: and the windshield of the car. Powerful magnetic mounts: the reinforced magnetic holder of this mount is what sets it apart from other mounts.

The magnetic mount is has a smooth surface that is perfectly suitable for mounting and holding any smartphone in place. The base of the mount remains stick on you dashboard of your car and does not move, no matter how much swiveling or rotation you do. Its 5 times easier to use than any other mounts just stick it on your car and you are good to go. This guarantees that your smartphone will always remain in your preferred position. Magnetic car mount holder.
BrandWixGear #ad
ManufacturerWizGear #ad
Height2 Inches
Length3 Inches
Width2 Inches
Part NumberMagnetic phone mount 112
ModelMagnetic phone mount 112

7. TORRAS

#ad

TORRAS Ultra-Durable Cell Phone Holder for Car, Universal Car Phone Mount Dashboard Windshield Vent Compatible with iPhone 12 11 Pro Max XS X XR 8 SE, Samsung Galaxy S20+Ultra S10 Note 10 Plus &All

#ad
TORRAS #ad - Completely hands-free and views-adjustable. It fits perfectly for your car no matter what the thicker blades vents or vertical ones. Also, easily stuck on the desk when you study, video, you can use it at home, teaching or listening.4 in 1 ultimate car mount: are you not sure which installation method is better for your car? No worries! The 4 in1 car phone holder mount can be flexible placement! Dashboard & Windshield & Air Vent & Home, all places work perfectly! Also, with low temperatures in winter and heat in summer, you can choose to avoid the issue caused by environmental influences.

2021 enhanced vent clip: you can screw the nut to fix the clamp freely, the sturdier it will be! Its two small arms are just enough to press against the upper and lower vent blades to form a stable triangular structure and lighten the load on the middle one, the tighter you screw, with no damage to your car. Like iphone se /11/ 11 pro/11 pro max /x/ xs max/xr/8 plus/8/7/6s plus, lg v20, clamp fast with one hand! ▶The cell phone car mount holder is suitable for all kinds of mobile phones with brand thick cases, Google Pixel 3a/4 XL, One Plus and more.

Military-grade sturdiness test: the latest enhanced torras cell phone holder for car passed the military-grade sturdiness test! Absolutely sturdier 10 x than normal ones! The suction cup can withstand the temperature from -20℃(-4°F to 95℃/203°F, also be reusable! You can stick it on your car dash or windshield. What you get: with the car holder for cell phone, 1 sticky pad, and 1 user manual. Note: the sticky pad just can be used once, 1 strong air vent clip, you can get a package including 1 enhanced suction cup, please think twice to stick it. This clip more than 10X sturdier than normal ones.
BrandTORRAS #ad
ManufacturerTORRAS #ad
Height4.65 Inches
Length9.08 Inches
Weight0.5 Pounds
Width2.55 Inches
Part NumberCTVK06-JP
ModelCHANG 4in1
Warranty36 Months

8. Wowteez

#ad

Car Phone Mount, Anti-Shake Stabilizer Compatible With iPhone 12 11 pro/11 pro max/XS/XR/X/8/7,Galaxy, Dashboard Windshield Car Phone Holder with Long Arm, Strong Sticky Gel Suction Cup, Moto and More

#ad
Wowteez #ad - Built to last and protect: the polished surface makes the mount look sleek in your car. As summer approaches, please avoid direct exposure to the sun as this may affect the function of your car mount. The suction cup is reusable, Simply rinse in water and let air dry to restore the stickiness. Most importantly, it can be bent to avoid obstructing display and irregular vents.

Galaxy s10/s9/s8/s7/s6/j5/j3/a5/a6/a7, iphone 11 pro/ 11 pro max/ x/xs/xr/8plus/8/7plus/7/6plus/6s/6, LG G5/G6/V30/V20 und MP3. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands. Comes with an anti-shake stabilizer, it safely hold the device without vibrating and wobbling. Strong suction cup with sticky gel: super strong vacuum suction cup features a layer of sticky gel and a locking lever which can maximize the stability and keep the mount in place. The foldable holding feet allow hassle-free charging on the go. Note: please avoid the car mount if you use a pop grip.

Up to 15cm/5. 9in aluminum long gooseneck sends the dashboard Phone mount much closer to you without blocking your sight, giving you the freedom to position it on multiple locations on the dashboard or windshield. Thanks to the 360 degrees ball-head, either in landscape or portrait mode for convenient navigating, calling, the dashboard mount can be flexibly tuned to display at an optimal viewing angle, and music in the vehicle. View your phone at any angle: the flexible and durable gooseneck can be bent to the shape you like, allowing for flexible adjustment for easy positioning and access to device controls.
BrandWowteez #ad
ManufacturerWowteez #ad
Height2.95 Inches
Length5.35 Inches
Width3.46 Inches
Warranty48 Months

9. RAXFLY

#ad

Phone Car Holder Mount, RAXFLY Windshield/Air Vent/Dashboard Cell Car Phone Holder for Car 360 Degree Rotation Universal Suction Mount Stand Compatible with iPhone 11 Samsung S20 Plus All Smartphones

#ad
RAXFLY #ad - Just pull or push that adjusts devices get the right length without manual rotation of the nut. 360 degree rotation and 270 degree up or down support mobile phone vertical, allow differnt angle for you to get perfect sight. Just place your phone on it with the arms open and squeeze the arms manually,then the holder can grip the phone by three sides no-slip rubbers tightly, this can also allow you release the phone easily.

Universal compatible for smartphone such as, samsung galaxy s20/s20 plus/s10/s10 plus/s9/s9 plus/note 10/9/8 Nexus, iPhone 11/11 Por/11 Pro MAX/X/XR/XS Max, iPhone 8/8Plus/7/7 Plus/6/6s plus case, car accessories for different smartphone devices. Phone will battery wallet case can not used for it. Safety & guarantee: we are aimed at offering you a perfect shopping experience, you can get 12-month warranty for each phone car mount. Multi-function 3 in 1 car phone mount: phone car holder have washable suction cup and upgraded air vent clip, you can install it on the dashboard windshield or air vent.

Apply to most of cars, trucks, SUV, trucks and it as good assistant for Uber taxis drivers. This holder will keep the phone stable make sure safe driving even if turning, braking or driving on bumpy road. Windshield dashboard phone holder with a telescopic arm can extend between 4-6. 6 inch10-16cm. Adjustable any viewing angle: car phone holder stay at your air vent, horizontal using, not block your driving sight.
BrandRAXFLY #ad
ManufacturerRAXFLY #ad
Height5 Inches
Length5 Inches
Width2 Inches
Part NumberRAXUS189206_1

10. iSeneo

#ad

Strong Sticky Gel Suction Cup, Anti-Shake Stabilizer Compatible iPhone 12 11 pro/11 pro max/XS/XR/X/8/7,Galaxy and More, Car Phone Holder Mount, Long Arm Dashboard Windshield Phone Holder

#ad
iSeneo #ad - Also, which means you can easily adjust the screen of your phone, the mount features a ball joint that allows a 360-degree rotation, either in landscape or portrait mode. Stable without falling: have you ever encountered the tragedy of a phone falling while driving? Then this car phone holder is exactly what you need.

Adjustable feet & dual release buttons: the feet of the car phone mount holder can be moved up and down to adapt to phones of various sizes, and avoid the phone's side key. Hold smartphones up to 6. 9’’: the dashboard car phone holder is made to be universal, and can work with phones with a 4. 0~6. 9" displays and up to 93mm/3. 7in wide, even with a thick case. With 2 release buttons, you can install or remove the phone with your left or right hand. 360° rotation: the gooseneck can be flexibly bent to get a comfortable viewing angle.

Multiple installation options: this car phone mount uses a long and flexible gooseneck that can be bent down and away from your dashboard, so you can view your phone clearly without worrying about blockage to your sight of the road ahead. Compatible with iPhone Series, Galaxy Series, and more smartphones. It is not only equipped with a sticky suction cup, but also a stabilizer, which can prevent the phone from wiggling or falling, even over rough roads.
BrandiSeneo #ad
ManufactureriSeneo #ad
Height2.17 Inches
Length4.33 Inches
Width2.99 Inches
Warranty24 months