As an Amazon Associate I earn from qualifying purchases.
Hantek HT25 #ad - Connect the ground clip to a good ground on the vehicle. Connect the ht25 to the automotive oscilloscope before connecting to the vehicle. Connect to vehicle.
BTMETER #ad - Accurate ampere measurement+/- 3. 0%+10 accuracy for signal output conversion. Great companion probe for dmmsit’s recommended to use bt-605a with btmeter multimeters: bt-770K, dial to mV range for ampere measurement, BT-770T for easy accurate measurement.
1mv = 1a output & standard 3/4 inch banana plugs makes it compatible with most multitesters that features with 1mV sensitivity. Ac/dc 600a clamp-on probecapable of measuring AC/DC up to 600 amps, This clamp adapter is built for higher current measurement.
The arrow on the jaw indicates the DC current direction of positive current flow from positive to negative. When use it with other brands multimeters, BT-770N, 1mV = 1A output. Tipsclamp the amp probe around the live wire only to get the current reading, or use an “AC line splitter”.
Autel #ad - It works with jaws that open to allow clamping around an electrical conductor. Maxisys msoak it comes with 1-year warranty and 24/7 tech support covering all defects in materials and workmanship from the date of original purchase.
It determines whether the ignition plug needs to be replaced or cleaned. Includes 65a ac/dc current clamp, 650a ac/dc current Clamp, coil on plug probe, HT Extension Lead 2pcs and Battery Clip 2pcs.
Hantek #ad - Special anti-interference design, high accuracy of measurement. Do not need to add extension cable. Highlight led which is convenient to operate at night or in dark condition.
bayite #ad - For example, if your current signal is only 02 amps, you could loop the wire through the sensor 10 times and the signal would by 10X stronger and would appear as 2.
0 amps. Loop through sensor multiple times to strengthen signal. Compatible with large wire; Diameter of the hole through sensor is 3/4 inch19 mm. Through-hole design: easy Wiring; Measure positive or negative current; No current direction limitation.
KAIWEETS #ad - To plug in the leads is easy. Note: please take off the cap before using the leads. Anti-burn with double ceramic fuse and thermistor protection circuit. Multi-function - non-contact voltage testing and live function with sound and light alarm.
Wide applications - kaiweets ht118a multimeter measures up to 600v ac/dc voltage, duty-cycle, 10A AC/DC current and 60 MOhms resistance, capacitance, electrical tester also tests temperature, wire on-off, frequency, and test diodes and continuity.
Silicone protective case prevents it from falling damage. Aftersales - kaiweets provides a 36-month after-sale service, thermocouple, test leads, lifetime technical support. Autoranging saves you the hassle of having to know which range of value. High voltage Protection is active on all ranges. Flashlight on the back ensures easy use in dimly lit places. Easy operation - switch the dial to the function you need, and the led lights on the jacks will shine accordingly.
FLIR #ad - Ac voltage probe output for wider compatibility. Switchable ac current range: 30 A, 300 A, 3000 A. Standard banana plug cables fit most meters. Adds 3000 a ac current measurements to existing meters. Convenient 25 cm 10" flexible clamp with locking mechanism.
Autel #ad - If you aren’t satisfied or the tool you bought malfunctioned, 3-month unconditional return & replacement policy is always available. All is packed in a blow-molded carrying case that provides extra cushion against bumps or accidents and proofing against dust. Package listyou’ll get the whole package of: 1*65a ac/dc current clamp, 1*650a ac/dc current clamp, 2*HT Extension Lead, 1*Coil on Plug Probe, and 2*Battery Clip.
Ac/dc current clamps want to measure the ac/dc? connect the included current clamp to a multimeter or an oscilloscope, and open the jaws to clip around the electrical conductor. Easy-to-use cop probe want to check if the ignition plug needs to be replaced or cleaned? Just use the included COP probe working with the oscilloscope to easily catch the ignition waveform.
The 65a clamp measures the maximum 65A current + 20 KHz frequency. You can directly get the current value with ease. Buy with confidencehave questions about the product? reach us anytime to get time-efficiency 24/7 technical assistance and 1-year product quality backup. The 650a clamp measures the maximum 650A current + 400 KHz frequency. Its high measurement accuracy, the arbitrary-curved cable, and the highlight LED will give you ever-smooth operation while testing even at night.
1. OTC
#adOTC 3820-06 Low Amp Probe
#adOTC #ad - Works for ignition coils, relays, fuel injectors, electric motors and parasitic draw. Measures current range: 0-60 ampere AC/DC. The ac/dc current measurement is non-intrusive.More information #ad
| Brand | OTC #ad |
| Manufacturer | OTC #ad |
| Height | 1.5 Inches |
| Length | 8.4 Inches |
| Weight | 0 Pounds |
| Width | 4.3 Inches |
| Part Number | 3820-06 |
| Model | 3820-06 |
| Warranty | 3 month limited warranty |
More information #ad
2. Hantek HT25
#adHantek HT25 Auto Ignition Probe Automotive Oscilloscope Probe High Voltage Inductive Capacitance Ignition Probes Diagnostic-tool Accessories
#adMore information #ad
| Brand | Hantek HT25 #ad |
| Manufacturer | Qingdao Hantek Electronic Co., Ltd #ad |
| Weight | 0.33 Pounds |
| Part Number | Hantek HT25 |
| Model | HT25 |
More information #ad
3. BTMETER
#adBTMETER BT-605A AC/DC 600A Clamp-on Current Probe Amp Adapter for Work with Digital Multimeters
#ad1mv = 1a output & standard 3/4 inch banana plugs makes it compatible with most multitesters that features with 1mV sensitivity. Ac/dc 600a clamp-on probecapable of measuring AC/DC up to 600 amps, This clamp adapter is built for higher current measurement.
More information #ad
Easy to usemaximum jaw caliber size up to 1. 77 inches 45mm, allows you to make accurate AC or DC amperage measurement up to 600 amps without breaking the circuit. The arrow on the jaw indicates the DC current direction of positive current flow from positive to negative. When use it with other brands multimeters, BT-770N, 1mV = 1A output. Tipsclamp the amp probe around the live wire only to get the current reading, or use an “AC line splitter”.
| Brand | BTMETER #ad |
| Manufacturer | BTMETER #ad |
| Part Number | BT605A |
More information #ad
4. Autel
#adCoil On Plug Probe, Compatible with Autel Ultra/MS919/MP408, HT Extension Lead, and Battery Clip, Autel MaxiSys MSOAK Oscilloscope Accessory Kit Includes 65/650A Current Clamps
#adIt determines whether the ignition plug needs to be replaced or cleaned. Includes 65a ac/dc current clamp, 650a ac/dc current Clamp, coil on plug probe, HT Extension Lead 2pcs and Battery Clip 2pcs.
More information #ad
Compatible with the msultra, MS919 & MP408. The ignition waveform is a window, through which we can see what happened in the engine combustion chambers. Cop probe can catch the ignition waveform of automobile engine easily. And the 650a ac/dc current clamp measures a maximum current of 650A with a frequency up to 400 KHz. The current clamp measures a maximum current of 65a with a frequency up to 20 KHz.| Brand | Autel #ad |
| Manufacturer | Autel #ad |
| Part Number | JMXD-MSOAK |
More information #ad
5. Hantek
#adHantek HT25COP ignition waveform of automobile engine Coil-on-Plug and Signal Probe, can be works with normally oscillscope
#adMore information #ad
It can be used with normal oscilloscope. Directly measure on the ignition coil easily. Ergonomic design, can be arbitrary curved.| Brand | Hantek #ad |
| Manufacturer | Hantek #ad |
| Part Number | 100001HT25COP |
More information #ad
6. ELECTRONIC SPECIALTIES
#adESI 695 80 Amps DC/AC Low Current Probe
#adELECTRONIC SPECIALTIES #ad - Compatible with many lab scopes and graphing multimeters. Use to generate current waveforms for diagnostic analysis. Low battery indication, auto power-off. Also works great with digital multimeters. Jaw opening of 1/2 inch clamps over most negative battery cables.More information #ad
| Brand | ELECTRONIC SPECIALTIES #ad |
| Manufacturer | ELECTRONIC SPECIALTIES #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.82 Pounds |
| Width | 0 Inches |
| Part Number | ATD-5592 |
| Model | ATD-5592 |
| Warranty | Repair only up to 1 yr |
More information #ad
7. bayite
#adBayite DC 5-120V 100A Mini Digital Current Voltage Amp Meter Ammeter Gauge with Hall Effect Sensor Transformer
#ad0 amps. Loop through sensor multiple times to strengthen signal. Compatible with large wire; Diameter of the hole through sensor is 3/4 inch19 mm. Through-hole design: easy Wiring; Measure positive or negative current; No current direction limitation.
More information #ad
Electrically isolated from high voltage power source which eliminates risk to delicate monitoring equipment and also minimizes safety concerns. Display voltage or + -current; voltage Range: 5V-120V; Current range: 0-100A.| Brand | bayite #ad |
| Part Number | BYT-VAM-033 |
More information #ad
8. KAIWEETS
#adKAIWEETS Digital Multimeter TRMS 6000 Counts Voltmeter Auto-Ranging Fast Accurately Measures Voltage Current Amp Resistance Diodes Continuity Duty-Cycle Capacitance Temperature for Automotive
#adWide applications - kaiweets ht118a multimeter measures up to 600v ac/dc voltage, duty-cycle, 10A AC/DC current and 60 MOhms resistance, capacitance, electrical tester also tests temperature, wire on-off, frequency, and test diodes and continuity.
More information #ad
Please feel free to contact us if you have any concerns. Large 2. 9” lcd backlight display, easy-to-read digits offer a 6000-count resolution. Package includes multimeter, batteries and user manual. Double insulated unit. Silicone protective case prevents it from falling damage. Aftersales - kaiweets provides a 36-month after-sale service, thermocouple, test leads, lifetime technical support. Autoranging saves you the hassle of having to know which range of value. High voltage Protection is active on all ranges. Flashlight on the back ensures easy use in dimly lit places. Easy operation - switch the dial to the function you need, and the led lights on the jacks will shine accordingly.
| Brand | KAIWEETS #ad |
| Manufacturer | KAIWEETS #ad |
| Height | 2.17 Inches |
| Length | 7.48 Inches |
| Width | 3.54 Inches |
| Part Number | KW8022930 |
| Model | HT118A |
More information #ad
9. FLIR
#adFLIR TA72 Universal Flex Current Probe Accessory, 10 Inch
#adMore information #ad
| Brand | FLIR #ad |
| Manufacturer | FLIR Systems, Inc. #ad |
| Height | 11 Inches |
| Length | 4.7 Inches |
| Weight | 0.79 Pounds |
| Width | 1 Inches |
| Part Number | TA72 |
| Model | TA72 |
More information #ad
10. Autel
#adWork with MaxiFlash VCMI in MaxiSys Ultra, Includes 65A, MS919 or Oscilloscope MP408, COP Probe, Autel MaxiSys MSOAK Oscilloscope Accessory Kit, 650A AC/DC Current Clamps
#adAc/dc current clamps want to measure the ac/dc? connect the included current clamp to a multimeter or an oscilloscope, and open the jaws to clip around the electrical conductor. Easy-to-use cop probe want to check if the ignition plug needs to be replaced or cleaned? Just use the included COP probe working with the oscilloscope to easily catch the ignition waveform.
More information #ad
Meet maxisys msoakthe autel maxisys msoak oscilloscope accessory kit needs to pair with the maxiFlash VCMI included in the MS Ultra or MS919, or the 4-channel oscilloscope MP408 sold separately, helping retrieve electrical data such as AC/DC and ignition waveform to maximize your diagnostic efficiency. The 65a clamp measures the maximum 65A current + 20 KHz frequency. You can directly get the current value with ease. Buy with confidencehave questions about the product? reach us anytime to get time-efficiency 24/7 technical assistance and 1-year product quality backup. The 650a clamp measures the maximum 650A current + 400 KHz frequency. Its high measurement accuracy, the arbitrary-curved cable, and the highlight LED will give you ever-smooth operation while testing even at night.
| Brand | Autel #ad |
| Manufacturer | Autel #ad |
| Part Number | MSOAK-Autel |
| Model | MSOAK-Autel |
More information #ad
