As an Amazon Associate I earn from qualifying purchases.





Corner Exit Adapters. 2. 5" slash cut weld on 18" Black Tips x2. This is a great choice for the budget minded enthusiast that is looking for great sound and performance at a great price.




1. Truck Exhaust Kits
#ad
Shop Line Dual Exhaust Sytem 2.5 inch Aluminized No Muffler With Corner Exit Adapters, Truck Exhaust Kits
#adTruck Exhaust Kits #ad - Welding not Required. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle.More information #ad
Installation Hardware Included. High quiality 2. 5" mandrel bent Aluminized Tail Pipes. No muffler Included. This product is in compliance with the Clean Air Act in full.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Height | 9 Inches |
Length | 48 Inches |
Width | 20 Inches |
Part Number | AM25DR9403NMFNT00455 |
More information #ad
2. Truck Exhaust Kits
#ad
DIY dual exhaust system 2.5 pipe No Muffler Corner exit, Truck Exhaust Kits
#adTruck Exhaust Kits #ad - This product is in compliance with the Clean Air Act in full. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems.More information #ad
The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. Aluminized mandrel bent for longer life. No muffler is Included.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Part Number | DR040612WNMFNT00455 |
More information #ad
3. Truck Exhaust Kits
#ad
Shop Line dual exhaust system 2.5 AL pipe Flowmaster 40 2.5" Polished Rolled Edge Clamp on Tip Corner exit, Truck Exhaust Kits
#adTruck Exhaust Kits #ad - Looking for the origional Flowmaster sound? Then take a look at these 40 series Flowmaster mufflers. This product is in compliance with the Clean Air Act in full. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle.More information #ad
2. 5" rolled edge clamp on 18" polished Tip x2. Corner Exit Adapters. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. Aluminized mandrel bent for longer life.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Height | 9 Inches |
Length | 48 Inches |
Weight | 65 Pounds |
Width | 20 Inches |
Part Number | M25FF9804F40TKRC455 |
More information #ad
4. Truck Exhaust Kits
#ad
Truck Exhaust Kits, Shop Line dual exhaust system 2.5 AL pipe No Muffler Corner exit
#adTruck Exhaust Kits #ad - This product is in compliance with the Clean Air Act in full. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems.More information #ad
The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. Aluminized mandrel bent for longer life. Corner Exit Adapters. No muffler is Included.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Height | 9 Inches |
Length | 48 Inches |
Weight | 65 Pounds |
Width | 20 Inches |
Part Number | M25GF0713NMFNT00455 |
More information #ad
5. Truck Exhaust Kits
#ad
Truck Exhaust Kits, Shop Line dual exhaust system 2.5 AL pipe Magnaflow 2.5" Polished Rolled Edge Clamp on Tip Corner exit
#adTruck Exhaust Kits #ad - Aluminized mandrel bent for longer life. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. This product is in compliance with the Clean Air Act in full. Corner Exit Adapters.More information #ad
Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. 2. 5" rolled edge clamp on 18" polished Tip x2. Magnaflow xl 3 chamber mufflers use a unique combination of large-diameter perforated tubing and strategically placed sound baffles to reduce unwanted resonance and help your engine create horsepower.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Height | 9 Inches |
Length | 48 Inches |
Width | 20 Inches |
Part Number | M25GF9906MF3TKRC455 |
More information #ad
6. Truck Exhaust Kits
#ad
Shop Line dual exhaust system 2.5 AL pipe 1 chamber muffler 2.5" Black Slash Cut Weld on Tip Corner exit, Truck Exhaust Kits
#adTruck Exhaust Kits #ad - This product is in compliance with the Clean Air Act in full. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle.Corner Exit Adapters. 2. 5" slash cut weld on 18" Black Tips x2. This is a great choice for the budget minded enthusiast that is looking for great sound and performance at a great price.
More information #ad
The flowsound muffler is a moderately aggressive 1 chamber muffler. It will give that deep throaty tone and mind blowing performance normally found in more expensive brand name mufflers. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. Aluminized mandrel bent for longer life.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Height | 9 Inches |
Length | 48 Inches |
Width | 20 Inches |
Part Number | M25GF0713FS1BW18455 |
More information #ad
7. Truck Exhaust Kits
#ad
DIY dual exhaust system 2.25 pipe Flowmaster Super 40 SW Tip Corner exit, Truck Exhaust Kits
#adTruck Exhaust Kits #ad - Includes flowmaster Super 44 muffler. Corner Exit Adapters. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. This product is in compliance with the Clean Air Act in full.More information #ad
Aluminized mandrel bent for longer life. 2. 5" slash cut weld on 12" Chrome Tips x2. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Part Number | TT000614WS40SW12452 |
More information #ad
8. Truck Exhaust Kits
#ad
Truck Exhaust Kits, Shop Line dual exhaust system 2.5" Aluminized pipe Flowmaster Super 44 Muffler 2.5" With Slash Cut Chrome Tips and Corner Exit for Silverado, Sierra, F-Series,& Ram
#adTruck Exhaust Kits #ad - This product is in compliance with the Clean Air Act in full. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems.More information #ad
Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Height | 9 Inches |
Length | 48 Inches |
Weight | 100 Kilograms |
Width | 20 Inches |
Part Number | AM25GF0713F44SW18455 |
More information #ad
9. Truck Exhaust Kits
#ad
Truck Exhaust Kits, DIY dual exhaust system 2.5 pipe Magnaflow Corner exit
#adTruck Exhaust Kits #ad - Aluminized mandrel bent for longer life. Includes dual Inlet Magnaflow Stainless muffler. This product is in compliance with the Clean Air Act in full.More information #ad
Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Part Number | GF969912WDMFNT00455 |
More information #ad
10. Truck Exhaust Kits
#ad
Truck Exhaust Kits, Shop Line dual exhaust system 2.5 AL pipe Flowmaster Super 44 2.5" Polished Rolled Edge Clamp on Tip Corner exit
#adTruck Exhaust Kits #ad - Flowmaster super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology as the Super 40 mufflers. Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems.More information #ad
The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. This product is in compliance with the Clean Air Act in full. Corner Exit Adapters. 2. 5" rolled edge clamp on 18" polished Tip x2. Aluminized mandrel bent for longer life.Brand | Truck Exhaust Kits #ad |
Manufacturer | Truck Exhaust Kits #ad |
Height | 9 Inches |
Length | 48 Inches |
Weight | 65 Pounds |
Width | 20 Inches |
Part Number | M25GF0713F44TKRC455 |
More information #ad