As an Amazon Associate I earn from qualifying purchases.
Hidden Hitch #ad - Part number: 80232. Package weight : 25. 15 pounds. Package dimensions: 34. 95 l x 6. 97 h x 15. 98 w inches. Country of Origin : China.
CURT #ad - The ball mount also has a 4-inch drop and 2-inch rise to promote level towing. Versatile use. Easy to install. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver.
To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. Hitching up your trailer is easy with this 2-inch ball mount. Corrosion-resistant. Then, secure the shank in place with a hitch pin sold separately.
The rounded shank makes installation easy. For long-lasting use, snow, dirt, easily resisting damage from rain, this ball hitch is protected with a durable black powder coat finish, road salt and other corrosive threats. Open-back receiver for easy cleaning. Ready to tow. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank trailer ball sold separately.
Reese #ad - Gross towing weight capacity – 5, 000 to 8, 000 lbs. Your purchase includes one reese towpower class iii hitch, 37042 model | hitch Box Cover, Towing Guide, Reese Towpower 37042 Class Iii/Iv 2" Square Tube Multi-Fit Receiver, Installation Instruction.
All-welded construction for maximum strength and safety | Metal Shield black coating provides ultimate protection against corrosion | Drilling may be required.
No special Tools Required for Installation. Receiver tube size – 2”. Tongue weight Capacity – 500 lbs. A higher "class" of hitch does not increase the vehicle's towing capacity. Important: never tow a trailer heavier than the rated tow capacity of your vehicle.
CURT #ad - Versatile design. Fully tested. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays. Tongue weight limited to lowest-rated towing component. This trailer hitch is rated for 3, 500 lbs.
Easy to install. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options.
Rust, chip, uv-resistant. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. Dependable strength. Every curt class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Gross trailer weight and 525 lbs.
Pro Series #ad - Hitch meets and exceeds v-5, csa and SAE J684 standards, and is inspected for quality and workmanship. Easy installation: designed for a perfect fit that looks great too.
5, 000 lb. Exceptional engineering: computer-aided design and fatigue and stress testing ensure a strong design. No drilling required for this quick and easy DIY installation. Please consult the vehicles owners manual for maximum towing capacity.
Draw-Tite #ad - All-welded construction for maximum strength and safety. Material:steel. Hitch Class:3. Meets and exceeds v-5 csa and SAE J684 standards and are inspected for quality and workmanship. Fatigue and stress testing ensure a strong design that will withstand road abuse.
RIGID HITCH INCORPORATED #ad - Made in USA. 2 inch shank - 13 Inch Length. 1 inch ball Hole Size. 2 inch drop 3/4 Inch Rise. Black powder Coat Finish.
CURT #ad - Hitching up your trailer is easy with this 2-inch ball mount. Easy to install. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. For long-lasting use, snow, easily resisting damage from rain, dirt, this ball hitch is protected with a durable black powder coat finish, road salt and other corrosive threats.
Ready to tow. This ball hitch is constructed from high-strength steel and is rated to tow up to 7, 500 pounds gross trailer weight and 750 pounds tongue weight limited to lowest-rated towing component.
This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. Dependable strength. Then, secure the shank in place with a hitch pin sold separately. Corrosion-resistant. The rounded shank makes installation easy. The ball mount also has a 2-inch drop and 3/4-inch rise to promote level towing. Versatile use.
1. Hidden Hitch
#ad16" x .75" x 2", 6000 lbs., Reese 80232 Hidden Hitch® Angle-Cut Class III Ball Mount
#adHidden Hitch #ad - Limited lifetime warranty. Black powder coat finish. Hidden hitch 87533 class III/Iv: Receiver. Gross trailer weight gtw weight Carrying We And Up To 12, 000 Lbs. The max-frame class 3/4 is rated At Up To 8, 000 Lbs.More information #ad
Every max-frame is custom Built According To Manufacturer And Model-Year Specifications. Angle cut class iii ball mount, 6k gtw, 1" ball hole, 2" drop, 16" length, 3/4" rise, black. Ball hole size 1".| Brand | Hidden Hitch #ad |
| Manufacturer | Hidden Hitch #ad |
| Height | 3 Inches |
| Length | 20 Inches |
| Weight | 8.5 Pounds |
| Width | 3 Inches |
| Part Number | 80232 |
| Model | 0223.1009 |
More information #ad
2. Hidden Hitch
#adHidden Hitch 80232 2" Class III Square Ball Mount
#adMore information #ad
| Brand | Hidden Hitch #ad |
| Manufacturer | Hidden Hitch #ad |
| Height | 3 Inches |
| Length | 20 Inches |
| Weight | 0.1 Pounds |
| Width | 3 Inches |
| Part Number | 80232 |
| Model | 80232 |
More information #ad
3. Hidden Hitch
#adHidden Hitch 80233 Class III Black Ball Mount, 4" Drop
#adHidden Hitch #ad - Length: 16", drop: 4", rise: 2-3/4". Black powder coat finish over A-coat. Class iii Ball Mount. Weight capacity: 6, 000 lbs. Gtw. Fits 2" square receiver opening.More information #ad
| Brand | Hidden Hitch #ad |
| Manufacturer | Hidden Hitch #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 9.75 Pounds |
| Width | 0 Inches |
| Part Number | 80233 |
| Model | 0223.1015 |
More information #ad
4. CURT
#ad4-Inch Drop, 1-Inch Hole, 7,500 lbs, CURT 45270 Class 3 Trailer Hitch Ball Mount, 2-In Rise, Fits 2-Inch Receiver
#adTo install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. Hitching up your trailer is easy with this 2-inch ball mount. Corrosion-resistant. Then, secure the shank in place with a hitch pin sold separately.
More information #ad
Dependable strength. This ball hitch is constructed from high-strength steel and is rated to tow up to 7, 500 pounds gross trailer weight and 750 pounds tongue weight limited to lowest-rated towing component. The rounded shank makes installation easy. For long-lasting use, snow, dirt, easily resisting damage from rain, this ball hitch is protected with a durable black powder coat finish, road salt and other corrosive threats. Open-back receiver for easy cleaning. Ready to tow. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank trailer ball sold separately.
| Brand | CURT #ad |
| Manufacturer | Curt Manufacturing #ad |
| Height | 3 Inches |
| Length | 18 Inches |
| Weight | 2.9 Pounds |
| Width | 5 Inches |
| Part Number | 45270 |
| Model | 45270 |
| Warranty | Manufacturer Warranty |
More information #ad
5. Reese
#adJeep, Nissan, 2 in. Receiver, Plymouth vehicles, Mazda, Ford, Isuzu, Reese Towpower Multi-Fit Trailer Hitch Class III, Dodge, GMC, Compatible with Select Chevrolet, Chrysler
#adAll-welded construction for maximum strength and safety | Metal Shield black coating provides ultimate protection against corrosion | Drilling may be required.
More information #ad
All hitches are designed for Customers With Trucks, Vans, And Sport Utility Vehicles. Find the right hitch: 1 identify the towing capacity of the tow vehicle see vehicle's manual | 2 Determine the gross trailer & tongue weight fully loaded weight | 3 Select the class of the hitch, hitch ball and ball mount rated for your vehicle. No special Tools Required for Installation. Receiver tube size – 2”. Tongue weight Capacity – 500 lbs. A higher "class" of hitch does not increase the vehicle's towing capacity. Important: never tow a trailer heavier than the rated tow capacity of your vehicle.
| Brand | Reese #ad |
| Manufacturer | Reese Towpower #ad |
| Height | 30 Inches |
| Length | 7 Inches |
| Width | 11 Inches |
| Part Number | 37042 |
| Model | 37042 |
| Warranty | 1 Year |
More information #ad
6. CURT
#adBlack, Concealed Main Body, CURT 13343 Class 3 Trailer Hitch, Fits Select Toyota Sienna , 2-In Receiver
#adEasy to install. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options.
More information #ad
It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. This hitch offers a custom, factory fit on select model years of the Toyota Sienna. Rust, chip, uv-resistant. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. Dependable strength. Every curt class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Gross trailer weight and 525 lbs.
| Brand | CURT #ad |
| Manufacturer | CURT #ad |
| Height | 24 Inches |
| Length | 57 Inches |
| Width | 11 Inches |
| Part Number | 13343 |
| Model | 13343 |
| Warranty | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
More information #ad
7. Pro Series
#adREESE Towpower 51083 Class III Custom-Fit Hitch, 2" Square Receiver, Maximum Strength
#ad5, 000 lb. Exceptional engineering: computer-aided design and fatigue and stress testing ensure a strong design. No drilling required for this quick and easy DIY installation. Please consult the vehicles owners manual for maximum towing capacity.
More information #ad
Maximum strength: the reese towpower class III Custom-fit Hitch boasts an all-welded construction for added strength, safety, and a lifetime of trouble-free towing. Dimensions: 45. 2” x 15. 6” x 7. 2”. Towing capacity: up to 500 pounds tongue weight and gross towing weight of 5, 000 lbs.| Brand | Pro Series #ad |
| Manufacturer | Pro-Series #ad |
| Height | 5 Inches |
| Length | 5 Inches |
| Weight | 0.1 Pounds |
| Width | 5 Inches |
| Part Number | 51083 |
| Model | 51083 |
| Warranty | 3 Year |
More information #ad
8. Draw-Tite
#adReese Towpower 51032 Class III Custom-Fit Hitch with 2" Square Receiver opening
#adMore information #ad
Many no drill applications and MetalShield protective coating for increased corrosion resistance and OEM quality protection. Up to 500 pounds tongue weight and gross towing weight of 5000 pounds - you should always consult the vehicles owners manual for maximum towing capacity.| Brand | Draw-Tite #ad |
| Manufacturer | Pro-Series #ad |
| Height | 7.8 Inches |
| Length | 15 Inches |
| Weight | 0 Pounds |
| Width | 32.5 Inches |
| Part Number | 51032 |
| Model | 51032 |
| Warranty | 3 Year |
More information #ad
9. RIGID HITCH INCORPORATED
#adRigid Hitch Class III, IV Hitch Ball Mount UB-213-B
#adMore information #ad
| Brand | RIGID HITCH INCORPORATED #ad |
| Manufacturer | Rigid Hitch #ad |
| Weight | 6 Pounds |
| Part Number | UB-213-B |
| Model | 8542124174 |
More information #ad
10. CURT
#ad3/4-Inch Rise, Fits 2-Inch Receiver, CURT 45260 Class 3 Trailer Hitch Ball Mount, 2-In Drop, 7,500 lbs, 1-Inch Hole
#adReady to tow. This ball hitch is constructed from high-strength steel and is rated to tow up to 7, 500 pounds gross trailer weight and 750 pounds tongue weight limited to lowest-rated towing component.
More information #ad
It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank trailer ball sold separately. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. Dependable strength. Then, secure the shank in place with a hitch pin sold separately. Corrosion-resistant. The rounded shank makes installation easy. The ball mount also has a 2-inch drop and 3/4-inch rise to promote level towing. Versatile use.
| Brand | CURT #ad |
| Manufacturer | Curt Manufacturing #ad |
| Height | 3 Inches |
| Length | 17 Inches |
| Weight | 9 Pounds |
| Width | 4 Inches |
| Part Number | 45260 |
| Model | 45260 |
| Warranty | Manufacturer warranty |
More information #ad
