Top 10 Jeep Wrangler JK Front Bumper Stubby – Automotive Bumpers

As an Amazon Associate I earn from qualifying purchases.

1. Rough Country

#ad

1047, Rough Country Front Bumper Caps for 2007-2018 Jeep Wrangler JK

#ad
Rough Country #ad - Backed by rough Country's Limited Lifetime Replacement Warranty. Improves approach angles | Eliminates 11. 5" on each Side. Product and Installation Supported by RC. Caps are made of highly durable, nylon material. Aggressive look and functionality | Converts your JK OEM Bumper to a Rock Crawling Stubby.
BrandRough Country #ad
ManufacturerRough Country #ad
Height7 Inches
Length9.25 Inches
Weight7.6 Pounds
Width9.25 Inches
Part Number1047
Model1047
WarrantyLimited Lifetime Warranty

2. Rugged Ridge

#ad

Rugged Ridge 11540.61 HD X-Striker Add-On for use with HD Front Bumpers, 07-18 Wrangler JK and 18-Current Wrangler JL

#ad
Rugged Ridge #ad - Easy bolt-on installation with hidden hardware for clean appearance. Sturdy 2-inch OD tubular steel construction. Fit type: Vehicle Specific. Tough satin black powder coat finish.
BrandRugged Ridge #ad
ManufacturerRugged Ridge #ad
Height13 Inches
Length33 Inches
Weight15 Pounds
Width15 Inches
Part Number11540.61
Model11540.61
Warranty5 year limited

3. EAG

#ad

EAG Stubby Front Bumper W/Fog Light Holes Fit for 07-18 Wrangler JK

#ad
EAG #ad - High quality material - manufactured from durable 5/32" steel sheet and 2 3/8" x. 120 wall steel tubing. Our stubby design offers maximum tire clearance. The adaptor is designed to mount JL /JT sport fogs in an aftermarket bumper.

An integrated in-bumper design prevents roller fairlead interference and maximizes utility. Included d-rings are 3/4” diameter, 500lbs. D-ring &winch location design - shackle mounts are robotic-welded onto the bumper from the inside and outside for maximum strength. Fitment - fit for 2007-2018 wrangler jk, 2018 2019 2020 2021 2022 wrangler jL models, and 2020 2021 2022 JT Gladiator. Textured black powder coat finish for corrosion protection and durability.

Reinforced corners designed for offroad. Winch. Jl/jt fog light adaptor & mount hole - pre-machined oe fog light holes are compatible with OEM fog light. Fog lights are not included. Stubby bumper - stubby front bumper offers a rugged appearance and aggressive design to withstand any terrain. Winch location supports up to 12, and can support up to 9, with a 7/8” diameter pin, 000 lbs.
BrandEAG #ad
ManufacturerEAG #ad
Height12.2 Inches
Length54.72 Inches
Weight71.21 Pounds
Width19.29 Inches
Part NumberJJKFB021

4. EAG

#ad

EAG Stubby Front Bumper W/LED Lights & Winch Plate Fit for 07-18 Wrangler JK

#ad
EAG #ad - Bulit-in winch plate for up to 12, 000lbs. No cutting or modifications required. Winches. Easy installation - Easy bolt-on installation. Direct bolt-on design for secure rattle free installation.

Wire harness and switch for LED lights are included. Interchangeable light surrounds - EAG patent pending metallic gray ABS light surrounds included. High strength D-ring mounts are welded on. Led lights - two powerful 12w circle lED lights provide vastly improved night time visibility. Offroad compatibility - Great for 2007-2018 Wrangler JK. Reinforced corners designed for offroad. Stubby bumper - manufactured from durable 5/32" steel sheet and 2 3/8" x. 120 wall steel tubing. Textured black powder coat finish for corrosion protection and durability. Two 4. 75 ton d-ring shackles and black isolators included.
BrandEAG #ad
ManufacturerEAG #ad
Height11.02 Inches
Length55.12 Inches
Weight79.48 Pounds
Width22.05 Inches
Part NumberJJKFB026

5. EAG

#ad

EAG Stubby Front Bumper W/Fog Light Holes Fit for 18-22 Wrangler JL

#ad
EAG #ad - Stubby bumper - stubby front bumper offers a rugged appearance and aggressive design to withstand any terrain. High quality material - manufactured from durable 5/32" steel sheet and 2 3/8" x. 120 wall steel tubing. The adaptor is designed to mount JL /JT sport fogs in an aftermarket bumper.

Textured black powder coat finish for corrosion protection and durability. Fog lights are not included. Jl/jt fog light adaptor & mount hole - pre-machined oe fog light holes are compatible with OEM fog light. Our stubby design offers maximum tire clearance. Included d-rings are 3/4” diameter, with a 7/8” diameter pin, and can support up to 9, 500lbs. An integrated in-bumper design prevents roller fairlead interference and maximizes utility.

Reinforced corners designed for offroad. Fitment - fit for 2007-2018 wrangler jk, 2018 2019 2020 2021 2022 wrangler jL models, and 2020 2021 2022 JT Gladiator. D-ring &winch location design - shackle mounts are robotic-welded onto the bumper from the inside and outside for maximum strength. Winch location supports up to 12, 000 lbs. Winch.
BrandEAG #ad
ManufacturerEAG #ad
Height9.06 Inches
Length56.7 Inches
Weight65 Pounds
Width18.51 Inches
Part NumberJJKFB021_JL

6. Rugged Ridge

#ad

Front; 07-18 Wrangler JK, 20-Current Gladiator JT, Rugged Ridge 11540.32 HD Bumper, Stubby, 18-Current Wrangler JL

#ad
Rugged Ridge #ad - Engineered to mount aftermarket winches for greater versatility and with built-in jack lifting points at every corner. Oversized, dual-drilled tow hooks accept ¾ and 7/8-inch D-shackles. Offroad accessories: get serious about off-roading with a variety of tow hooks, recovery gear, tube doors, hitches & kits that give yourself a way out in sticky situations.

We offer winches, mirror kits & more accessories. Rugged ridge jeep parts: count on rugged ridge to provide you with proven Jeep parts & accessories like bumpers, interior accessories, wheels, lift kits, floor liners & more for varying Jeep models. Five year warranty: our rugged ridge products are covered by industry leading 5 year warranty & Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.

Concealed hardware: this high strength steel stubby bumper features a sharp faceted design that conceals hardware for a clean look. Steel front bumper: trail-tested & proven designs that pack a serious punch in protecting your vehicle & front grill.
BrandRugged Ridge #ad
ManufacturerRugged Ridge #ad
Height11 Inches
Length54 Inches
Weight45 Pounds
Width12 Inches
Part Number11540.32
Model11540.32
Warranty5 Year Limited

7. Hooke Road

#ad

Hooke Road Wrangler JK Stubby Front Bumper + Rear Bumper Combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018

#ad
Hooke Road #ad - Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance. 4. 75 ton capacity D-rings 9500lb. Rated are included; 2x 18W LED lights are included. Easy bolt-on installation - desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation.

Fitment - hooke road front & rear bumper combo fits Compatible with Jeep Wrangler JK & Unlimited 2007-2018 Sahara Rubicon Sport Unlimited. Rear bumper - with built-in hitch receiver for up to 9500 lb; two solid d-ring shackle mounts are welded into bumpers from the inside and outside for increasing strength.

Instruction & mounting hardware included. Heavy duty construction & corrosion resistance finish - the bumpers are manufactured from durable 5/32" steel sheet and 2"X0120" steel tubing. Front bumper - with winch plate for up to 12000 lbs; upper bull bar mounting hook for 15. 2" light barlight bar not include; Cut out fog light housings and a red lamp with logo "Since 1941".
BrandHooke Road #ad
ManufacturerHooke Road #ad
Weight69 Pounds
Part NumberZ.BXG.2055+2030

8. Rugged Ridge

#ad

Black; 07-18 Jeep Wrangler JK/JKU, Rugged Ridge 11544.05 Spartacus Stubby Bumper

#ad
Rugged Ridge #ad - Stubby front bumper for a great approach angle and maximum tire clearance. Package dimensions :23. 8 cm l x 59. 0 cm w x 142. 0 cm H. Product type :vehiclE BUMPER. Package weight :23. 5lbs. Country of origin :Taiwan.
BrandRugged Ridge #ad
ManufacturerRugged Ridge #ad
Height9.5 Inches
Length57 Inches
Weight23.5 Pounds
Width23.5 Inches
Part Number11544.05
Model11544.05
Warranty5 Year Limited

9. Rough Country

#ad

1062, Rough Country Stubby Hybrid Front Bumper for 2007-2018 Jeep Wrangler JK

#ad
Rough Country #ad - Aggressive off road Look and Feel for your Wrangler JK. Integrated oEM Fog Light Mounts. Utilizes factory bumper mounts / Tow Hooks | Easy at Home Bolt-On Installation Supported by RC. Durability / strength | Light Weight | Recessed Winch Plate. Backed by rough Country's Limited Lifetime Replacement Warranty.
BrandRough Country #ad
ManufacturerRough Country #ad
Height10 Inches
Length11.25 Inches
Weight39.75 Pounds
Width45.5 Inches
Part Number1062
Model1062
WarrantyLimited

10. EAG

#ad

EAG Front Bumper with Fog light Housing and Winch Plate Fit for 07-18 Wrangler JK Offroad

#ad
EAG #ad - Fog light housing - fog light recesses accept factory fog lights. The jk wrangler front bumper features a built-in winch plate that is capable of supporting a 12, 000 lb. Jk front bumper with fog light compatibility is a perfect upgrade for those looking for increased protection while keeping factory fog light function and style.

The jk bumper's rugged design provides practical front end protection for both on and off road performance. Heavy duty construction - eag manufactures their wrangler jk unlimited front bumper to exact tolerances from 5/32" thick mild steel sheet and 2" x 0120" steel tubing for superior strength and durability. As a direct fit replacement, welding, this JK front bumper requires no additional cutting, or fabrication for installation.

Rated d-rings on beefy mounts, OE fog light housings and an aggressive tube over rider with additional light accommodations. Dose not fit for 2017 JK Rubicon Recon. High quality textured powder coat for corrosion protection. Perfect for off-road use - the eag rock crawler front bumper is equipped with 9, 500 lb. Custom fit - the front bumper guard fit for 2007 - 2018 Wrangler JK. Winch.
BrandEAG #ad
ManufacturerEAG #ad
Height13.78 Inches
Length59.84 Inches
Weight90.72 Pounds
Width21.65 Inches
Part NumberJJKFB009