Top 10 Spring Compressor Tool – Suspension Tools

As an Amazon Associate I earn from qualifying purchases.

1. ABN

#ad

13/16in Socket 1/2in Drive, ABN 11.5in Strut Spring Compressor Tool – Set of 2 Pair – Macpherson Spring Compression

#ad
ABN #ad - Locks into place: acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools. Wide range of compatibility: universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut; Hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool; 11.

5-inch threaded rods for 10-inch to 105-inch maximum opening to fit jaws to coils Wide jaws with standard diameter of approximately 6 inches OD front coil springs. Easy to use: use the abn 11. 5” inch strut spring compressor tool – set of 2 pair – macpherson spring compression, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, 13/16” Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life.

Built to last: constructed with forged hooks and center screw hardened for maximum strength and longevity; Designed to withstand extreme pressure in any environment; For professional use. Easy storage: heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
BrandABN #ad
ManufacturerABN #ad
Height1.2 Inches
Length0.3 Inches
Weight8 Pounds
Width1.2 Inches
Part Number9210
ModelABN 9210

2. Orion Motor Tech

#ad

Orion Motor Tech Macpherson Strut Spring Compressor,13/16in Socket 1/2in Drive, Coil Spring Compressor Tool

#ad
Orion Motor Tech #ad - Wide compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11. 5-inches threaded rods for 10-inches to 105-inches maximum opening to fit jaws to coils Wide jaws with standard diameter of approximately 6 inches OD front coil springs.

Heavy duty 11-4/5” strut spring compressor tool – set of 2 pair – macpherson spring compression, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, strut tubes, 13/16” socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, and remove the strut; Lubricate threads with anti-seize compound for prolonged life.33. Click "Ask a question".

Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools. 2. Click the seller name and enter the store page. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result. Orion motor tech pursue outstanding quality and 2-year warranty service, only have point of departure, there is no terminal point.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height2.76 Inches
Length13.78 Inches
Width5.12 Inches
Part NumberOMTSCS300
Model8542035209

3. CARTMAN

#ad

CARTMAN 11.5in Strut Spring Compressor Tool – Set of 2 Pair – Macpherson Spring Compression, 3/4in Socket 1/2in Drive

#ad
CARTMAN #ad - This item is designed to compress many MacPherson Strut Spring sizes. The hooks are forged and the center screw is hardened for long life. This tools strut spring Compressor quickly and safely compresses the spring for easy. The broad spring contact and built in detent pins help to lock the spring into place for safer. Replacement of the strut cartridge or strut assembly repair.
BrandCARTMAN #ad
ManufacturerCartman #ad
Part NumberCM-MS-1612
Model10

4. 8MILELAKE

#ad

8MILELAKE Macpherson Strut Spring Compressor

#ad
8MILELAKE #ad - The broad spring contact and built in detent pins help to lock the spring into place for safer. Replacement of the strut cartridge or strut assembly repair. This tools strut spring Compressor quickly and safely compresses the spring for easy. This item is designed to compress many MacPherson Strut Spring sizes. The hooks are forged and the center screw is hardened for long life.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height1.97 Inches
Length5.91 Inches
Weight2.2 Pounds
Width3.94 Inches
Part NumberD069150
ModelSpring Tool

5. Shankly

#ad

Spring Compression Tool, Shankly Coil Spring Compressor Tool 2 Pieces, Universal

#ad
Shankly #ad - Strong and durable: shankly’s coil spring compressor has a drop forged enamel body and is composed of top quality materials, giving the mechanic confidence spring compressor jobs will be done right.

Shankly’s strut spring compressor features double ended jaws with attachable security hooks for added safety and control. Dimensions: this coil spring compressor tool has an operating capacity of 300 mm and overall length of 300 mm. Versatile tool: shankly’s strut compressor works as a spring compressor for struts and other coil springs on most passenger and light commercial vehicles, providing the mechanic a versatile compressor solution.

Easy to use: shankly’s spring strut compressor is simple to operate, allowing the mechanic to get the job done right and then move on. Makes spring compression safer: compressing struts and springs can be dangerous. 10 inch bolt provides max height of removable spring at 9 ½ inches.
BrandShankly #ad
ManufacturerShankly #ad
Part NumberB1008
Model8542035204

6. OEMTOOLS

#ad

Works on Most Vehicles | 9.75 Inch Maximum Safe Opening, OEMTOOLS 25553 MacPherson 10.75 Inch Strut Spring Compressor | Safely Compresses Strut Springs for Easy Removals and Installs | Set of 2

#ad
OEMTOOLS #ad - Don’t cut corners: strut replacement can be a time intensive job. 75 inch max opening makes these tools compatible with most MacPherson Strut Springs on both large and small vehicles. You can put yourself in danger of injury if you use inferior tools; the OEMTOOLS MacPherson Strut Spring Compressor won’t slip, and won’t break – This car safety tool does its job right every time.

Heavy duty design: heavy steel body, forged hooks, and hardened center screw hold up against the immense energy of compressed strut springs; these are great tools for mechanics, because they hold up through repeated MacPherson Strut replacements. Important auto suspension tool: macpherson struts are the most important element of the suspension system in many modern vehicles, and should be replaced, 000 to 80, on average, every 50, 000 miles.

Safe strut spring compressor tool: rugged safety latches make broad contact with the Strut Spring, and keep the tool safely locked to the spring during removal & re-installation on the new MacPherson Strut. Fits most macpherson strut springs: 9.
BrandOEMTOOLS #ad
ManufacturerOEMTOOLS #ad
Height2.2 Inches
Length12.8 Inches
Width3.8 Inches
Part Number25553
Model25553
WarrantyOEMTOOLS Limited Lifetime

7. 8MILELAKE

#ad

8MILELAKE Macpherson Strut Spring Compressor Interchangeable Fork Coil Extractor Set

#ad
8MILELAKE #ad - No impact wrench! Hand ratchet only. Includes three sets of jaws: 2 each of, 65-125mm, 88-160mm and 126-212mm. The coil spring compressors are manufactured under very strict quality control and are approved to endure extremely high loads. Professional multi Use MacPherson Interchangeable Fork Spring Compressor Set. Compresses all types of MacPherson style coil springs front and rear. Sgs test report: the max force 4487 KG.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height0.59 Inches
Length2.17 Inches
Weight19.84 Pounds
Width0.98 Inches
Part NumberSZ
ModelSpring Tool

8. ARES

#ad

Repair Bent Struts, and Damaged Struts, ARES 70371, Macpherson Strut Spring Compressor, Drop Forged Jaws with Safety Pins for Safe and Easy Compression, Strut Tubes

#ad
ARES #ad - Get the job done now with arES! Reliable | effective | efficient: users trust ares to be quality tools. The v-threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools. It's as simple as attaching the brackets completely onto the spring, tightening down the tool and then removing the strut.

Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. Why you need it: safely and easily compress coil springs with our macpherson strut spring compressor! use it to replace shock absorbers, spring sets, repair bent struts and damaged spindles. Design considerations: features a heavy duty v-threaded rod that allows for fast and precise movement with a large surface area for broad spring contact. With your support, you realize they are more than a pet, we’re proud to help this great organization.

The jaws are constructed from drop forged steel with a hardened center screw for maximum strength and longevity. The set includes a high quality storage case to store your tools when they're not in use! The v-thread center screw is 5/8 inches by 11 inches long, allows for precise movement and will stay locked in place until rotational force is applied. If you have any issues with your areS Macpherson Strut Spring Compressor, simply contact customer service for troubleshooting help, replacement, parts, or refund. You are backed by our Performance Assurance Limited Lifetime Warranty.
BrandARES #ad
ManufacturerARES #ad
Part Number70371
Model4336330725
WarrantyPerformance Assurance Limited Lifetime Warranty

9. SURGEDO

#ad

SURGEDO Coil Spring Compressor Remover Installer Tool Kit, Heavy Duty Steel Hook to Hold Auto Car Spring Safely, 1/2in Drive Internal Strut Compressor Tool

#ad
SURGEDO #ad - Strength and durability: forged structures allow for repair of bent struts, strut tubes and damaged parts. The coil compressor hook holds the spring tightly by rotating the easy-to-use hex nut. Unique design: internal compressor adopts inner coil spring for easy disassemble, it is more efficient than traditional two pieces spring compressors.

Durable steel hooks: this spring compressor tool has a special claw-like claw that is wound around the coil to ensure firm grip and improve safety. Please use anti-sticking agent to lubricate the thread and prolong the service life. Using it to remove and install automotive coil springs up to 5-5/8”O. D, designed to grasp a maximum 3/4” wire diameter spring.

It is suitable for any 7/8" hand socket wrench or high torque impact wrench, you can easy to twist the spring compressor. Thickened thread design to ensure durable and strength. Easy to use: 1/2" drive compression disc spring to replace shock absorber unit or spring. Wide compatibility: the strut spring compressor is used for the repair and replacement of shock absorbance, struts and springs.
BrandSURGEDO #ad
ManufacturerSURGEDO #ad
Weight1.94 Pounds

10. ABN

#ad

ABN Coil Spring Compression Tools, 2pc Durable Coil Spring Clamps Strut Spring Compressor Tool Set with Safety Guard

#ad
ABN #ad - Easy to use extend internally threaded rod to full length and attach the bracket jaws onto the spring; Adjust safeguard and tighten locking nut to secure in place; With a hand ratchet or wrench, slowly and evenly crank the 19mm hex socket to compress the spring; Not intended for impact tools.

Safely install coil springs remove and install coil springs, struts, secure, shock absorbers, and spacers safely and efficiently with the ABN 2 Piece Auto Coil Spring Compressor Tool Set; Strut spring compressor kit allows for safe, and balanced compression. Built to last drop-forged steel to provides maximum durability and strength, bending, while black oxide finish resists corrosion and rust; Rugged frame reduces flexing, and warping even under high tension; Always grease threads before use to avoid stripping.

Increase security when working safety guard bar adjusts from 8 to 11. 7 inches 203-29. 7cm and prevents accidental pressure release while you work with strong, powerful springs; Suspension spring tool hook jaws are slanted and have locking mechanisms for increased security to protect you or your workers better. Universal strut spring compression tool automotive coil spring compression tool brackets feature hook jaws that can extend from 1. 4 to 11 inches 3. 6 to 27.
BrandABN #ad
ManufacturerABN #ad
Height3 Inches
Length14.1 Inches
Weight4.67 Pounds
Width9.1 Inches
Part Number2344