Top 10 Trifold Bed Cover – Truck Tonneau Covers

As an Amazon Associate I earn from qualifying purchases.

1. Gator Covers

#ad

Gator EFX Hard Tri-Fold Truck Bed Tonneau Cover | GC24019 | Fits 2015-2020 Ford F-150 5' 5" Bed | MADE IN THE USA

#ad
Gator Covers #ad - Perimeter rubber seals and inner drain tubes carry water away from and out of the bed, snow, providing superior protection from the elements. Panels are coated with a scratch-resistant, black powder coat finish. 3-year warranty | the gator efx hard folding cover is backed by a 3-year warranty, and supported by our US-based customer service team.

Easy install & low-profile design | the efx tonneau cover can easily be installed in less than 30 minutes, without the use of tools or need for drilling. Fits 2015-2020 ford f-150 5' 5" Bed. Weather protection | this hard folding truck bed cover comes equipped with an integrated water management system to keep the rain, dirt and dust out of your truck bed. If anything goes wrong with your cover, Made in the USA, our tonneau cover experts are at your service and ready to help! The truck bed cover mounts to the inside of the truck bed rails allowing the cover to sit flush with your truck bed, providing a stylish low-profile look.

Tough truck bed protection | the gator efx hard tri-fold is constructed of heavy-duty aluminum panels that automatically lock when closed, UV-protective, providing a level of security only found in hard folding tonneau covers.
BrandGator Covers #ad
ManufacturerUnderCover #ad
Height5.75 Inches
Length32.75 Inches
Width69.75 Inches
Part NumberGC24019
ModelGC24019
Warranty3 Years

2. Tyger Auto

#ad

Tyger Auto Black Top T3 Soft Tri-Fold Truck Tonneau Cover for 2015-2020 Ford F-150 Styleside 5.5' Bed TG-BC3F1041

#ad
Tyger Auto #ad - Limited lifetime ! | important: please measure your truck bed size before ordering. Easy no drilling installation with instruction and mounting hardware provided. We accept returns; however customer will assume the return shipping cost if ordered wrong.

Note: small holes will need to be cut in the bed liner for vehicles equipped with over-the-bedrail bed liner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bed liner without modification. Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed. Us design Patented. Cover is dual-coated and made out of heavy duty 24oz marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.
BrandTyger Auto #ad
ManufacturerTyger Auto #ad
Height2.13 Inches
Length70.52 Inches
Weight29.01 Pounds
Width23.91 Inches
Part NumberTG-BC3F1041
ModelTG-BC3F1041
WarrantyLifetime

3. Gator Covers

#ad

Gator ETX Soft Tri-Fold | 59301 | fits Ford F-150 2009-14 5' 5" bed | Made in the USA

#ad
Gator Covers #ad - Simple operation | to open the cover, simply fold the panels towards the cab and secure into place with the integrated buckling system. Drive with the cover in the 2/3 open position when you need bed access for hauling large loads.

Easy & fast no-tool install | the gator etx tri-fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill, providing quick, convenient cargo protection. Sleek & durable design | the gator etx mounts on top of your truck bed rails providing a clean, low-profile appearance that enhances the appearance of your truck.

Eliminate the elements | this cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust out of the bed of your truck bed and protect your cargo in any weather condition. Fits ford f-150 2009-14 5' 5" bed. Each cover is custom fit to your truck’s year, make and model providing a tight fit and integrated look and feel.
BrandGator Covers #ad
ManufacturerExtang Corporation #ad
Height6 Inches
Length68 Inches
Width20 Inches
Part Number59301
Model59301

4. Gator Covers

#ad

2015-18, 2019 Limited/Legacy 1500 | Made in the USA, Gator ETX Soft Tri-Fold | 59110 | fits Chevy/GMC Silverado/Sierra 1500 6' 6" bed 2014-18, 2500/3500HD

#ad
Gator Covers #ad - Simple operation | to open the cover, simply fold the panels towards the cab and secure into place with the integrated buckling system. Each cover is custom fit to your truck’s year, make and model providing a tight fit and integrated look and feel.

Eliminate the elements | this cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust out of the bed of your truck bed and protect your cargo in any weather condition. Fits chevy/gmc silverado/sierra 1500 6' 6" bed 2014-18, 2500/3500hd - 2015-18, 2019 Limited/Legacy 1500 Drive with the cover in the 2/3 open position when you need bed access for hauling large loads.

Easy & fast no-tool install | the gator etx tri-fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill, providing quick, convenient cargo protection. Sleek & durable design | the gator etx mounts on top of your truck bed rails providing a clean, low-profile appearance that enhances the appearance of your truck.
BrandGator Covers #ad
ManufacturerExtang Corporation #ad
Height8 Inches
Length68 Inches
Width20 Inches
Part Number59110
Model59110
WarrantyLimited lifetime warranty on the frame and ten years on the vinyl -

5. Tyger Auto

#ad

Tyger Auto Black Top T3 Soft Tri-Fold Truck Tonneau Cover for 2014-2019 Chevy Silverado/GMC Sierra 1500 2015-2019 2500 3500 HD 2019 Classic ONLY Fleetside 6.5' Bed TG-BC3C1007

#ad
Tyger Auto #ad - Us design Patented. Cover is dual-coated and made out of heavy duty 24oz marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

We accept returns; however customer will assume the return shipping cost if ordered wrong. Note: small holes will need to be cut in the bed liner for vehicles equipped with over-the-bedrail bed liner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bed liner without modification. Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed. Limited lifetime ! | important: please measure your truck bed size before ordering. Easy no drilling installation with instruction and mounting hardware provided.
BrandTyger Auto #ad
ManufacturerTyger Auto #ad
Height2.13 Inches
Length69.1 Inches
Weight33.05 Pounds
Width28.43 Inches
Part NumberTG-BC3C1007
ModelTG-BC3C1007
WarrantyLifetime

6. Lyon cover

#ad

Lyon cover 5.5ft 67.1 inches Hard Tri-Fold Truck pickup Bed for 2015-2019 Ford F150 Tonneau Cover | LED Lamp | 3 Years Warranty |

#ad
Lyon cover #ad - Install:easy install, no drilling need. High-quality:protect your cargo from the elements & theft with this premium bed cover, make the hardware more corrosion-resistant, waterproof, Keeps Truck Bed Dry and Secure.

Electrophoretic treatment, snow proof and dirt proof, ensuring a superior durability. Simply fold from front and back, then lift up and off to gain full use of truck bed. Fitment:2015-2019 ford f-150 5. 5'/67. 1"; not for models with Factory Utility Track Sys. Item-offered:hard tri fold tonneau cover x 1; aluminum buckle x 2; triangle nut x 2; wrench x 4; bag buckle x 2; LED Lamp x 1; Instructions; Waterproof Adhesive Tape;x 2; Wrench x 4; Bag Buckle x 2; LED Lamp x 1; Instructions; Waterproof Adhesive Tape;.

Lightweight design permits easy removal and reinstall. Roll Bar. Material:1. 5 mm frp, 15mm pp honeycomb. Hardness of frp ≧ 30hba. Tensile strength of frp ≧ 80mpa. Bending strength of frp ≧ 150mpa. Compressive strength of PP Honeycomb ≧ 1.
BrandLyon cover #ad
ManufacturerLyon cover #ad
Height26.77 Inches
Length70.08 Inches
Weight61.55 Pounds
Width5.31 Inches
Part NumberLYCH015

7. Gator Covers

#ad

2019 Classic 1500 5' 7" bed w/out RamBox | Made in the USA, Gator ETX Soft Tri-Fold | 59201 | fits Dodge Ram 2009-18

#ad
Gator Covers #ad - Sleek & durable design | the gator etx mounts on top of your truck bed rails providing a clean, low-profile appearance that enhances the appearance of your truck. Easy & fast no-tool install | the gator etx tri-fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill, providing quick, convenient cargo protection.

Eliminate the elements | this cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust out of the bed of your truck bed and protect your cargo in any weather condition. Each cover is custom fit to your truck’s year, make and model providing a tight fit and integrated look and feel.

Fits dodge ram 2009-18, 2019 classic 1500 5' 7" bed w/out RamBox. Drive with the cover in the 2/3 open position when you need bed access for hauling large loads. Simple operation | to open the cover, simply fold the panels towards the cab and secure into place with the integrated buckling system.
BrandGator Covers #ad
ManufacturerGator Covers #ad
Height8 Inches
Length64 Inches
Width20 Inches
Part Number59201
Model59201

8. Deebior

#ad

Deebior 1pc 5Ft59.8"-60.5" Hard Tri Fold Truck Bed Tonneau Cover |CMH82059| +LED Lamp+Install Instruction+Waterproof Rubber Seals For 2016-2020 Toyota Tacoma

#ad
Deebior #ad - Condition:100% brand New and High Quality. Warranty: 3 year warranty against defects in materials and workmanship under its intended use. ;. Item-offered: hard tri fold tonneau cover x 1; aluminum buckle x 2; triangle nut x 2; wrench x 4; bag buckle x 2; led lamp x 1; Instructions; Waterproof Adhesive Tape; 25mm Screw x 10; Spring Washer x 12; Small Screw Clamp x 12; Big J-Rod x 2; Medium J-Rod x 4;.

Design advantage: 1. 5 mm frp, 15mm pp honeycomb. Hardness of frp ≧ 30hba. Tensile strength of frp ≧ 80mpa. Bending strength of frp ≧ 150mpa. Compressive strength of PP Honeycomb ≧ 1. 4mpa. Bending strength of PP Honeycomb ≧ 05mpa. Load-bearing capacity of Sheet Metal ≧ 350pounds. ;. Fitment: 16-20 toyota tacoma 5ft/59. 8"-605"; only for models with factory utility track Sys.
BrandDeebior #ad
ManufacturerDeebior #ad
Height5.31 Inches
Length65.35 Inches
Weight54.01 Pounds
Width24.8 Inches
Part NumberA80065-CMH82059
Warranty3 year warranty against defects in materials and workmanship under its intended use.

9. BAK

#ad

BAK BAKFlip G2 Hard Folding Truck Bed Tonneau Cover | 226121 | Fits 2014-18, 19 Limited/Legacy GM Silverado, Sierra: Limited/Legacy; 2014 1500, 15-19 ALL 6'6" Bed

#ad
BAK #ad - Fits 2014-18, sierra: limited/legacy; 2014 1500, 19 limited/legacy gm silverado, 15-19 ALL 6'6inches Bed. We’ve got your bak: make your purchase with confidence. Enhanced security: this cover features durable aluminum panels and an automatic latching system, providing greater security over vinyl covers.

The dual-action tailgate seal allows you to close the tailgate with the cover open or closed. The g2 is proudly made in the USA with a US-based support team. The g2 is operational from either side of the truck bed with quick-release cables under the panels. The bakflip g2 tonneau cover is weight rated up to 300 lbs.

Is easy to install, and has a 3-year, hassle-free warranty. Enhanced functionality: the g2’s prop rods hold the cover upright while open and they securely stow away when the cover is partially or fully closed. 100% bed access: the low-profile bakflip g2 hard folding cover allows you to drive with the cover fully closed, folded, or flipped up without covering the 3rd brake light.
BrandBAK #ad
ManufacturerBAK #ad
Height0 Inches
Length0 Inches
Weight71 Pounds
Width0 Inches
Part Number226121
Model226121
WarrantyManufacturer Warrranty

10. Gator Covers

#ad

"New Body Style" Does Not Fit With Multi-Function Split Tailgate | Made in the USA, Gator ETX Soft Tri-Fold | 59421 | fits Dodge Ram 2019-20 5' 7" bed, does not fit RamBox

#ad
Gator Covers #ad - Each cover is custom fit to your truck’s year, make and model providing a tight fit and integrated look and feel. Fits dodge ram 2019-20 5' 7" bed - does not fit rambox, "New Body Style" Does Not Fit With Multi-Function Split Tailgate.

Easy & fast no-tool install | the gator etx tri-fold can be installed in about 10 minutes by simply clamping the rails on without the use of a drill, providing quick, convenient cargo protection. Drive with the cover in the 2/3 open position when you need bed access for hauling large loads. Sleek & durable design | the gator etx mounts on top of your truck bed rails providing a clean, low-profile appearance that enhances the appearance of your truck.

Simple operation | to open the cover, simply fold the panels towards the cab and secure into place with the integrated buckling system. Eliminate the elements | this cover’s heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing keep rain, snow and dust out of the bed of your truck bed and protect your cargo in any weather condition.
BrandGator Covers #ad
ManufacturerGator Covers #ad
Height37 Inches
Length74 Inches
Width5 Inches
Part Number59421
Model59421
WarrantyLimited lifetime warranty on the frame and 10 years on the vinyl