1. ARB
#ad
ARB CKMA12 Air Compressor High Output On-Board 12V Air Compressor
#adARB #ad - Constructed entirely of lightweight, high strength engineering grade materials. Heavy duty maxi-fuse equipped for professional in-line circuit protection.More information #ad
Quality components for quiet operation and extra long life. Hard-anodized cylinder bore for reduced friction. Sealed for moisture and dust resistance.Brand | ARB #ad |
Manufacturer | ARB #ad |
Height | 5.88 Inches |
Length | 12.73 Inches |
Weight | 0.1 Pounds |
Width | 9.16 Inches |
Part Number | CKMA12 |
Model | CKMA12 |
More information #ad
2. Vixen Horns
#ad
Vixen Horns Heavy Duty Onboard Air Compressor 200 PSI. Universal Replacement for Truck/Car Train Horn/Suspension/Ride/Bag kit/System. Fits All 12v Vehicles Like Semi/Pickup Trucks/Jeep VXC8301
#adVixen Horns #ad - Amperage Draw: 23A. Duty cycle: 100% @ 100 PSI. Flow rate: 1. 7cfm @ 0 PSI. 12v permanent Magnetic Motor. Maximum working Pressure: 200 PSI.More information #ad
Brand | Vixen Horns #ad |
Manufacturer | Vixen Horns #ad |
Weight | 9.26 Pounds |
Part Number | VXC8301 |
More information #ad
3. VIAIR
#ad
VIAIR 200 PSI Ultra Duty Onboard Air System
#adVIAIR #ad - 200 psi maximum working pressure, 1. 76 cfm @ 0 psi. One year manufacturer's defect warranty through manufacturer with receipt. Includes the essential components to install an onboard air system: 480C Air compressor, relay, pressure switch, air tank fittings, 2.More information #ad
5 gallon air tank, air line and wiring. Can inflate a 37 inch tire from 0-30PSI in 7 minutes and 10 seconds. Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. Air tank should be used with a drain cock and pressure release valve.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 9.9 Inches |
Length | 26 Inches |
Weight | 0.01 Pounds |
Width | 13 Inches |
Part Number | 20001 |
Model | 20001 |
Warranty | One year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty |
More information #ad
4. VIAIR
#ad
VIAIR 10002 Quarter Duty Onboard Air System
#adVIAIR #ad - Please note- use thread sealant for proper installation. Not intended for tire inflation. Properly sealed, recommended torque for 1/8 inches is 10 to 11 feet pounds. Designed to actuacte smaller air horns, air lockers and for minor load levelling adjustments.Just connect your air line into our onboard air system. Recommended torque for 1/4 inches and 3/8 inches is 12 to 15 feet pounds. Thread tape is not recommended.
More information #ad
Remote mount air filter assembly, 2. 0 gallon air tank, sealed compressor, 90 to 120PSI pressure switch and more! Includes all parts needed for installation of you very own onboard air solution for air lockers and small air horns. Can be used to inflate helper bags for load leveling, inflate four tires up to 31 inches in diameter or use with heavy duty air horns. 120 psi maximum working pressure and 25% duty cycle.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 10 Inches |
Length | 23 Inches |
Weight | 0 Pounds |
Width | 14 Inches |
Part Number | 10002 |
Model | 10002 |
Warranty | One year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty |
More information #ad
5. Air Lift
#ad
Air Lift 25980 25980-2nd Generation and Mobile App WirelessOne
#adAir Lift #ad - Free ios and android mobile app easily connects with the bluetooth-enabled manifold. Manifold and controller software updates provided over the Air via free mobile app. Compact, wireless handheld controller with LCD display, programmable with up to three user-defined presets.More information #ad
Compact, weather-resistant and corrosion-proof, relay integrated, single path manifold. Easy installation, installs direct to battery in around 1 hour.Brand | Air Lift #ad |
Manufacturer | Air Lift #ad |
Height | 6.25 Inches |
Length | 11 Inches |
Weight | 5.24 Pounds |
Width | 9.75 Inches |
Part Number | 25980 |
Model | 25980 |
Warranty | 2 Years |
More information #ad
6. VIAIR
#ad
10007, VIAIR Constant Duty Onboard Air System
#adVIAIR #ad - Can inflate four tires up to 37 inches in diameter. Designed for uninterrupted use for up to an hour! at 72 degrees ambient temperature One year manufacturer's defect warranty included with copy of the receipt.Designed to be installed and mounted onto the vehicle. Please check the manufacturer's website for a wiring diagram. Comes with a viair 450c air compressor and a 110 to 145 PSI Pressure switch.
More information #ad
Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools. 150 psi maximum working pressure and 100% duty cycle at 100 PSI; 20feet 12-Gauge Wire with Inline Fuse Holder. Intended for inflation of tires up to 37 inches. Ingress protection Rating: IP67.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 10 Inches |
Length | 26.5 Inches |
Weight | 33.85 Pounds |
Width | 14.5 Inches |
Part Number | 10007 |
Model | 10007 |
Warranty | All VIAIR products come with a One Year Manufacturer Defect Warranty |
More information #ad
7. Viking Horns
#ad
Viking Horns FBA103C Heavy-Duty 200 PSI Air Compressor for Train Horns
#adViking Horns #ad - Moisture and dust resistant. Oil-less Design. With 1/4" npt braided air hose, and removable air Intake filter. 200 psi max pressure, 100% duty cycle. Works with up to 5 Gallons tanks. Dimensions & weight: 10-3/4" l x 4" w x 6-3/4" H. Weight: 9. 5 lbs.More information #ad
Brand | Viking Horns #ad |
Manufacturer | Viking Horns #ad |
Part Number | FBA103C |
Model | V103C |
More information #ad
8. VIAIR
#ad
10003, VIAIR Medium Duty Onboard Air System
#adVIAIR #ad - Designed to be installed and mounted onto the vehicle. Comes with one viair 325c air compressor anda 110 to 145PSI pressure switch.Can be used to inflate helper bags for load leveling, inflate four tires up to 31 inches in diameter or use with heavy duty air horns. Please check the manufacturer's website for a wiring diagram.
More information #ad
150 psi maximum working pressure and 33% duty cycle. One year manufacturer's defect warranty included with copy of the receipt. Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools, except for air hose. Intended for inflation of tires up to 33 inch.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 10.25 Inches |
Length | 26.5 Inches |
Weight | 10.25 Pounds |
Width | 14.25 Inches |
Part Number | 10003 |
Model | 10003 |
Warranty | All VIAIR products come with a One Year Manufacturer Defect Warranty |
More information #ad