Top 9 Bilstein 5100 4Runner Lift Kit – Automotive Replacement Shocks

As an Amazon Associate I earn from qualifying purchases.

1. Bilstein

#ad

Bilstein B8 5100 Series 2 Front Shocks Kit for 10-'15 Toyota 4Runner 4WD 0-2.5 inch lift Ride Monotube replacement Gas Charged Height Adjustable Shock absorbers part number 24-196499

#adBilstein #ad - Finish: zinc plated // reservoir: no Body Design: 46mm ID Snap Ring Grooved Body Coilover. Compatible with 10-'17 4Runner 4WD. Front Pair. Collapsed length in: 17. 58 extended Length IN: 22. 48.

Brand	Bilstein #ad
Manufacturer	Bilstein #ad
Height	28 Inches
Length	4 Inches
Weight	17 Pounds
Width	8 Inches
Part Number	24-196499(2)

2. Bilstein

#ad

Bilstein 24-248730 & 24-249966 Pair of B8 5100 Front & Rear Monotube Shocks for 96-02 Toyota 4Runner

#adBilstein #ad - Rear absorbers: non adjustable; hydraulic; 46mm id smooth Body; Extended Height 2079"; compressed Height 12. 91"; zinc Plated. Fits: 1996-2002 toyota 4runner base 2.

7l, sr5 & Limited 3. 4l; 4wd/rwd. Shock boots included; Improved ride quality, handling and comfort; Limited Lifetime Warranty. Front absorbers: 0-2. 75" lift depending on application; adjustable; nitrogen Gas Charged; 46mm ID Snap Ring Grooved Body; Extended Height 18. 27"; compressed Height 13. 66"; zinc Plated. Prop 65 warning: this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brand	Bilstein #ad
Manufacturer	Bilstein #ad
Height	35 Inches
Length	15 Inches
Weight	34 Pounds
Width	16 Inches
Part Number	24-248730/24-249966

3. Bilstein

#ad

Bilstein 5100 Monotube Gas Shocks Rear Pair for 1996-2002 Toyota 4Runner 4WD

#adBilstein #ad - Brand new In Box. All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation. Bilstein's limited Lifetime manufacturer's Warranty protects against defects and premature failure. Rearshocks for vehicles at factory height or w/0-2" rear Lift. Representative Image Actual Product May Vary. Part number 24-249966. Compatible with 4WD vehicles.

Brand	Bilstein #ad
Manufacturer	Bilstein #ad
Height	28 Inches
Length	4 Inches
Weight	15 Pounds
Width	8 Inches
Part Number	SIA03122964

4. Bilstein

#ad

Bilstein 24-196499 B8 5100 Series Set of 2 Front Monotube Replacement Gas Charged Height Adjustable Shock Absorbers for 10-14 Toyota Fj Cruiser 0-2.5in Lift

#adBilstein #ad - Body design: 46mm id Snap Ring Grooved Body Coilover. Collapsed length in: 17. 58 extended Length IN: 22. 48. Finish: Zinc Plated. Reservoir: No. Compatible with | | 4runner: > 2010-2017 4runner with 0" to 2 1/2" of lift, sr5, including limited, and trail 2017 4runner trd Off-Road with 0" to 2 1/2" of Lift | FJ Cruiser: > 2010-2014 FJ Cruiser Base with 0" to 2 1/2" of Lift.

Brand	Bilstein #ad
Manufacturer	Bilstein #ad
Height	28 Inches
Length	4 Inches
Weight	17 Pounds
Width	8 Inches
Part Number	24-196499(2)

5. Rancho

#ad

Rancho Quicklift leveling Struts + Rear RS9000XL Shocks Kit compatible with 03-14 Toyota 4Runner

#adRancho #ad - Factory shock mounting bolts are reused for installation. Rancho's limited lifetime warranty protects against defects and premature failure.

9 settings of compression and dampening adjustment. All necessary washers, bushings, and nuts included. Shock boots included with RS9000XL shocks. Front pair of struts & Springs + Rear Pair of Shocks. Front height not adjustable from specified height. Twin tube nitrogen gas charged design with 9 settings of compression dampening adjustment. Rs9000xl series shocks include a 90-day ride guarantee. Rancho's limited lifetime warranty protects against defects and premature failure.

Brand	Rancho #ad
Manufacturer	Rancho Performance Suspension #ad
Height	36 Inches
Length	8 Inches
Weight	65 Pounds
Width	8 Inches
Part Number	RS999913+RS999914+RS999305(x2)
Model	Shock Boot

6. Daystar

#ad

Made in America, Daystar, Black, all transmissions, fits 1996 to 2002 2/4WD, all cabs KT09107BK, Toyota 4Runner 1.5" Rear Lift Kit

#adDaystar #ad - Designed to improve ground clearance. Enhance the performance of the vehicle. Facilitate easy installation. Made from high density polyurethane. Allow use of large tires.

Brand	Daystar #ad
Manufacturer	Daystar #ad
Height	4.25 Inches
Length	10 Inches
Weight	2 Pounds
Width	6.25 Inches
Part Number	KT09107BK
Model	KT09107BK
Warranty	Limited Lifetime Warranty - Parts Only

7. Daystar

#ad

Fits 2010 to 2017 2/4WD, all transmissions, Toyota 4Runner 2.5" Lift Kit, Daystar, all cabs KT09134BK, Made in America

#adDaystar #ad - No metal-on-metal contact as with other leveling kits. Increase vehicle height/enhances performance. Lifts vehicle without sacrificing ride quality or load-carrying capacity. Easy install.

Brand	Daystar #ad
Manufacturer	Daystar #ad
Height	8 Inches
Length	12 Inches
Weight	1 Pounds
Width	8 Inches
Part Number	KT09134BK
Model	KT09134BK
Warranty	warranty

8. Bilstein

#ad

Bilstein 24-186728 5100 Series Shock Absorber

#adBilstein #ad - Fit type: Vehicle Specific. Package dimensions: 68. 072 h x 7. 62 l x 7. 62 w centimetres. Package weight: 1. 927 kilograms. Country of Origin : United States.

Brand	Bilstein #ad
Manufacturer	Bilstein #ad
Height	0 Inches
Length	0 Inches
Weight	4.4 Pounds
Width	0 Inches
Part Number	24-186728
Model	24-186728
Warranty	Lifetime

9. MotoFab Lifts

#ad

MotoFab Lifts Taco-lean 1/2 inch Front Lean Spacer Leveling Kit Compatible with Toyota Tacoma Uneven Taco lean

#adMotoFab Lifts #ad - Will raise the drivers side of your Tacoma to get rid of the Taco lean. Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension. Made in the usa and and come with a Lifetime warranty. Compatible with toyota tacoma 2005-2019 Does not fit 5 Lug. Can be installed in about 1/2 hour and does not require strut/coil disassembly like other kits.

Brand	MotoFab Lifts #ad
Manufacturer	MotoFab Lifts #ad
Height	6 Inches
Length	8 Inches
Width	8 Inches
Part Number	Taco-lean