Top 9 Denso Alternator Rebuild Kit – Automotive Replacement Alternator Rectifiers

As an Amazon Associate I earn from qualifying purchases.

1. CSS Auto Electric

#ad

121000-4300, 121000-3531,121000-4170, 56027912,56027913, Alternator Repair Kit Brushes,Terminal Block,Bearings for Chrysler Dodge Jeep Fits on Chrysler 56007912, Denso 121000-3530, 121000-4171

#adCSS Auto Electric #ad - Includes:brush holder assemblybrushes&springs included, rear bearings. R. Edimensions: 15mm id x 35mm od x 13mm w, front bearingd. Edimensions:17mm id x 52mm od x 16mm w, terminal blockCAPACITOR INCLUDED, SCREWS M4 x 07 x 5. 7mm llot of 3. Fits:chrysler 4339440, 5233973, 5234199, 5227669, 56005686, 5227672, 4491986, 53008646, 56027221, 5234033, 56027913, 5233949, 5226200, 5234032, 5233672, 56041394aa, 4557301, 5227100, 5234031, 5233416, 5233660, 56007912, 5234026, 56027912, 5233448, 5233449, 56005684, 5233599, 5234651, 5234029, 5234654, 5233673, 53008651, 5234208, 5234374, 5227674, 5233418, 5234028, 4419338, 5233608, 5234201, 53008647, 5252539, 56005685, 4364944, 5227349, 5227673, 56005685ab, 5234260, 5234206, 59005685.

Fits lester:13184, 13310, 13311, 13353, 13442, 13245, 13453, 13280, 13302, 13309, 13312, 13313, 13305, 13341, 13304, 13354, 13308, 13220, 13306, 13301, 13185, 13307, 13256, 13742, 13746, 14869.

Fits denso: 121000-2430, 121000-2660, 121000-4080, 121000-3470, 121000-4050, 121000-3410, 121000-4000, 121000-4100, 121000-4090, 121000-4030, 121000-3450, 121000-3390, 121000-4070, 121000-2490, 121000-3340, 121000-3380, 121000-3100, 121000-4060, 121000-3530, 121000-3400, 121000-3430, 121000-3370, 121000-3330, 121000-2680, 121000-3452, 121000-3440, 121000-3460, 121000-3360, 121000-4010, 121000-4040, 121000-3600, 121000-3310, 121000-3300, 121000-4041, 121000-3000, 121000-3531, 121000-4120. Will fit 90amp, 120amp, 136amp denso er/ef, ER/IF Alternators.

Brand	CSS Auto Electric #ad
Manufacturer	CSS Auto Electric #ad
Part Number	CSS13354B

2. ACDelco

#ad

ACDelco Gold 335-1086 Alternator

#adACDelco #ad - Key components are greased to ensure long term reliability in harsh conditions. New units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality. Acdelco professional new Alternators are computer tested for voltage stability, terminal function, and electronic circuit board integrity. Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle. All components are 100% New to provide improved performance.

Brand	ACDelco #ad
Manufacturer	ACDelco #ad
Height	6.8 Inches
Length	7.8 Inches
Weight	11.65 Pounds
Width	7.3 Inches
Part Number	335-1086
Model	335-1086
Warranty	24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.

3. Victory Lap

#ad

Victory Lap FDA-01 Alternator Repair Kit

#adVictory Lap #ad - Victory lap fda-01 alternator repair kit fits ford “1g” series 40-65 amp. This kit contains: rectifier, de Bearing, Brushes and Brush Springs, rectifier Bolts and Nuts, and Terminal Insulators.

Or better. Er/ef alternators used in 1962 to 1992 Ford Cars, Light-Trucks, Ag. This repair kit also includes illustrated instructions in Spanish, English and French. The victory lap fda-01 kit contains the parts required to do a quality repair at the best price possible. All parts are new and of OEM spec. An fda-f540 or the fda-f540sld are the recommended regulators to be used with these 1G Ford alternators. Industrial Units.

Brand	Victory Lap #ad
Manufacturer	Victory Lap #ad
Part Number	FDA01
Model	FDA-01
Warranty	30 days on parts -- replacement only

4. Denso

#ad

Denso First Time Fit Alternator, 211-6002

#adDenso #ad - No core Charge Req. Single Quantity. Part number: 211-6002. Package dimensions: 22. 8 h x 16. 7 l x 18. 6 w centimeters.

Brand	Denso #ad
Manufacturer	Denso #ad
Height	0 Inches
Length	0 Inches
Width	0 Inches
Part Number	211-6002
Model	211-6002

5. Denso

#ad

Denso 210-0750 Remanufactured Alternator

#adDenso #ad - Designed to meet grueling heat and Electrical Requirements; DENSO 210-0750 Remanufactured Alternator. Stators and rectifiers tested to 300 Volts, Rotors are Submitted to 600 Volts. Perfect mounting with No Belt/Pulley Alignment Issues. Bearings validated to oE Standards and Loaded with Premium OE-Standard Lubricants. Rotor slip rings buffed to an 8 micron surface Finish, with Run out Limited to 20 Microns, Minimizing Brush Wear and Abrasion.

Brand	Denso #ad
Manufacturer	Denso #ad
Height	0 Inches
Length	0 Inches
Width	0 Inches
Part Number	210-0750
Model	210-0750

6. Victory Lap

#ad

Victory Lap FDA-04 Alternator Repair Kit

#adVictory Lap #ad - The appropriate rectifiers are available separately for when one is needed. The fda-04 kit contains: regulator, brush holder assembly, and electric Contact Gel. The selection of parts is made to balance performance and economy.

Thus, the fda-04 kit contains a new replacement Regulator and other parts, but not the Rectifier. All parts are new and of OEM spec. The rectifier in the 3g alternator does not often fail. Victory lap fda-04 alternator repair kit fits ford “3g” ir/ef series, 95-130 amp. Or better. This repair kit also includes illustrated instructions in Spanish, DE & CE Ball Bearing, Insulator, Regulator cap, Hardware, English and French.

The fda-04 repair kit contains the parts required to do a quality repair at the best price possible. Alternators used from 1989 to 2008 in vehicles equipped with Ford 3G alternators. See fda-04-r1 or fda-04-r2 for the rectifier for your 3G series alternator. Check application information carefully. The two rectifiers for the 3G Series alternators are not interchangeable.

Brand	Victory Lap #ad
Manufacturer	Victory Lap #ad
Height	1.2 Inches
Length	9.7 Inches
Width	7 Inches
Part Number	FDA04
Model	FDA-04
Warranty	30 days on parts -- replacement only

7. Denso

#ad

Denso 210-0766 Remanufactured Alternator

#adDenso #ad - Bearings validated to oE Standards and Loaded with Premium OE-Standard Lubricants. Rotor slip rings buffed to an 8 micron surface Finish, with Run out Limited to 20 Microns, Minimizing Brush Wear and Abrasion. Designed to meet grueling heat and Electrical Requirements; DENSO 210-0766 Remanufactured Alternator. Stators and rectifiers tested to 300 Volts, Rotors are Submitted to 600 Volts. Perfect mounting with No Belt/Pulley Alignment Issues.

Brand	Denso #ad
Manufacturer	Denso #ad
Height	0 Inches
Length	0 Inches
Weight	13.5 Pounds
Width	0 Inches
Part Number	210-0766
Model	210-0766

8. beler

#ad

Beler Brushes & Brush Holder Rebuild Kit Fit For Denso Alternators Honda 31105-PD1-034 Toyota 27370-75060

#adbeler #ad - Fit for denso 021620-2530, 021620-2720 Fit for honda 31105-pd1-034, 31105-pr7-a01, 31105-PT0-003. Fit for toyota 27370-42010, 27370-75060 Fit for nippondenso/Denso Alternators. Material: plastic & Metal & Carbon.

Brand	beler #ad
Manufacturer	HERMESHINE #ad
Part Number	SHE4948

9. Crank-n-Charge

#ad

Alternator Brush Holder Compatible With/Replacement For Denso 90-120A ER/IF Alternators 021620-2430

#adCrank-n-Charge #ad - New aftermarket Part Not Rebuilt/Refurbished/Repurposed. Please verify this is the right part number before ordering. Specs: brush holder assembly, notes: Includes 2 #140-52003, unit type: alternators, Weight: 0.06 lbs / 003 kg. Replaces oem part numbers: Nippondenso: 021620-2430 .

Brand	Crank-n-Charge #ad
Manufacturer	Crank-n-Charge #ad
Part Number	AHND-9202
Model	AHND-9202
Warranty	One year warranty