Top 9 Smittybilt Rear Bumper JK – Automotive Bumpers

As an Amazon Associate I earn from qualifying purchases.

1. Smittybilt

 #ad

Smittybilt 76855 XRC Textured Black Rear Bumper with 2" Receiver Hitch and D-Ring Mounts

#ad
Smittybilt #ad - Made from 3/16 cold rolled steel and then robotically welded to the exact specifications. Features a 2-inch class iii tow rated receiver hitch and two D-ring mounts D-rings not included. Two stage matte Black powder coat finish. Do not use any type of cleaners that contain abrasives that may damage the finish of your part. 2 and 4-door models.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height20 Inches
Length69 Inches
Weight107 Pounds
Width14 Inches
Part Number76855
Model76855
WarrantyLimited WarrantiesSmittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products

2. Smittybilt

 #ad

Smittybilt 76856 XRC Black Textured Rear Bumper with Hitch and Tire Carrier for Jeep Wrangler/Wrangler Unlimited

#ad
Smittybilt #ad - 1-1/4” grade 5 mounting hardware. Black powder coat. 5-year limited warranty. Fits 2007 to 2016 jk wrangler, Rubicon and Unlimited. Features pressed tapered 2” diameter bearings, reinforced double sided gussets. Manufactured from 3/16” cold rolled steel and then robotically welded to the exact specifications. 2 and 4-door models.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height28 Inches
Length66 Inches
Weight173 Pounds
Width17 Inches
Part Number76856
Model76856
Warranty5-Year limited

3. Smittybilt

 #ad

Smittybilt 76896-01 XRC Atlas Rear Bumper with Hitch

#ad
Smittybilt #ad - These are complete Line Of Heavy-Duty Shop Products. Through creativity, productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories. These products on exceptionally High Order Fulfillment Rates, Breadth Of Available Products.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height11 Inches
Length74 Inches
Weight111 Pounds
Width20 Inches
Part Number76896-01
Model76896-01
WarrantyManufacturer Warranty

4. Smittybilt

 #ad

Black, Smittybilt 76745 SRC Carbine Rear Bumper for 2007-2018 Jeep Wrangler JK

#ad
Smittybilt #ad - Class iii receiver hitch; and solid 3/4" D-ring mounts that are welded on the inside and out. Smittybilt's renown rugged construction lets the cost-conscious or entry level Jeeper play with the big boys. Accommodates aftermarket-style 3x3 cube LED lights. Perfect mid width 57" design with raised corners for better entry and exit under the most extreme conditions. Fits jeep wrangler jk 2- and 4-door models; matches Smittybilt Carbine front bumper 76744.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height15 Inches
Length58 Inches
Weight92 Pounds
Width21 Inches
Part Number76745
Model76745
WarrantyManufacturer Warranty

5. Smittybilt

 #ad

Smittybilt 76732 Stryker Rear Bumper for Jeep JK

#ad
Smittybilt #ad - Auxiliary backup light cut outs. 3mm deep drawn formed steel. Removable mesh panels for customization. Raised corners for increased departure angles. Integrated d-ring and lift point fits up to 7/8" D-rings.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height14 Inches
Length69 Inches
Width20 Inches
Part Number76732
Model76732
WarrantyLifetime Structural And 5 Year Finish

6. Smittybilt

 #ad

Smittybilt 76892 XRC Atlas Front Bumper for 2007-2018 Jeep Wrangler JK 2/4-Door

#ad
Smittybilt #ad - 3/16" cold rolled steel bumper with bolt-on skid plate and bull bar. Innovative 4-piece design meets stringent international safety standards. Lower design winch plate allows greater airflow; 6x4. 5 and 10x4. 5 winch bolt patterns. Stylish bumperette with Atlas badging. Solid mount d-rings welded on the inside and out; light holes allow use of OE fog lights; light mounting tabs on bull bar; and marine grade stainless steel hardware.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height25 Inches
Length86 Inches
Weight223 Pounds
Width29 Inches
Part Number76892
Model76892

7. Smittybilt

 #ad

Smittybilt 76858 XRC Gen 2 Rear Bumper for Jeep Wrangler

#ad
Smittybilt #ad - Hdpe slip strips the ultimate fender-to-fender protection for rock crawling. Bolt-on design tire carrier Fits SRC, XRC and Factory Tenth Anniversary. Jeep bumpers - fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited. Single-handed opening operation Tuned to factory tailgate. Auxilliary back up light cutouts, LED lights included. Cb and jack mount. Frame pivot point. Bottle opene. Class iii hitch Anti-rattle provision. Roto pax gas/water can mount.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height14 Inches
Length69 Inches
Weight107 Pounds
Width20 Inches
Part Number76858
Model76858

8. Smittybilt

 #ad

Smittybilt 76614 SRC Gen 2 Rear Bumper for Jeep Wrangler

#ad
Smittybilt #ad - Uhmw ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling. 3/16-inch cold rolled steel with two-stage textured matte black finish;. Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions. New solid d-ring and jack point mount - welded on the inside and out. Aux back up light cut out provided.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height16 Inches
Length78 Inches
Weight117 Pounds
Width26 Inches
Part Number76614
Model76614

9. Smittybilt

 #ad

Smittybilt JB48-RT Textured Black Tubular Rear Bumper

#ad
Smittybilt #ad - Sport the signature look with pre-cut vertical uprights. Stainless steel design is polished to a mirror finish. One-piece design is robotically welded for extreme durability. Assured high quality and dependability. Tested under extreme conditions.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height10 Inches
Length69 Inches
Weight41.9 Pounds
Width13 Inches
Part NumberJB48-RT
ModelJB48-RT