Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

#ad
#ad
ZOOZ ZEN15 #ad - Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle. Compatibility: use the power switch with any certified z-wave gateway for simple on/off control Wink, HomeSeer, SmartThings custom device handler required, contact seller first, including Vera, Z-Wave alarm panels.

Quick status reports to the controller and on/off state recovery after power failure. Powerful hardware: made from high-quality components that will last, even when it's very cold or very hot 14° - 104°F, indoor use only. Powerful plug: the only z-wave plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system.

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More #ad - Connect your refrigerator, fan, AC unit, humidifier or dehumidifier, sump pump, or a gas clothes dryer to Z-Wave. Powerful z-wave: with built-in z-wave plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption. Powerful control: monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports your Z-Wave hub needs to support this feature.

Advanced settings and energy monitoring available for open systems only, and Fibaro Home Center Lite. Etl certified: complies with North American electrical safety standards.

More information about ZOOZ ZEN15 #ad

Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor

#ad
#ad
Aeon Labs LLC ZW100 #ad - Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±02%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. That means that it outperforms all that has come before it. Super-small at 1. 8 inches. Specifications: motion sensor : 16 feet, accuracy:+/- 5% at 77°f; temperature sensor : 14°f -10°c ~ 140°F 60°C, and 120° field of view; Humidity Sensor : 20% to 95%, accuracy: +/- 32.

9°f 05°c; light sensor : 0 lux to 1000 lux; vibration sensor : acts as tamper switch, on or off; operation temperature top: -4°f -20°c ~ 140°f 40°c; storing temperature: -40°F -40°C ~ 176°F 80°C; Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA or 2 x CR123A battery; Weight: 2.

Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor #ad - 6 oz 6-in-1 z-wave plus multisensor: motion, light lux, humidity, temperature, UV, vibration sensor.2 year battery life. It’s built around the latest z-wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. Multisensor 6 is the foundation of a modern smart home.

. Its perfectly small exterior hosts the technology for real-time intelligence. Multisensor 6 is a part of Aeotec Gen5 range of Z-Wave products.

More information about Aeon Labs LLC ZW100 #ad


Similar products



ZOOZ Z-Wave Plus 4-in-1 Sensor ZSE40 VER. 2.0 motion / light / temperature / humidity

#ad
#ad
ZOOZ #ad - Note: this sensor is supported by open Z-Wave systems ONLY. 4 smart sensors in 1: this compact device detects and reports motion, humidity, and light level to your smart home app. Super-small at 1. 8 inches. Can be installed in corner, in-wall, on shelf or in downlight. Works with certified z-wave gateways and tested with Fibaro, openHAB, SmartThings, Indigo 7, Vera.

Z-wave plus certified. It's z-wave plus certified to ensure it complies with the highest industry standards. Will it work with my hub? this sensor is not supported by wink, Vivint, hubitat, home assistant, VeraLite running under UI7, ADT Pulse, smartthings hub with custom device handler contact seller for instructions, veraedge, or other Z-Wave alarm panels.

ZOOZ Z-Wave Plus 4-in-1 Sensor ZSE40 VER. 2.0 motion / light / temperature / humidity #ad - Updated motion detection allows you to get even quicker activity reports. Customize it: choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different LED indicator modes your hub needs to support advanced parameter input. Security first: this sensor is equipped with bank-grade AES signal encryption.

It will work great with open systems like Almond Securify, HomeSeer, Qolsys, and VeraPlus. Compatible z-Wave hub required, temperature, sold separately. New improved version: the included cr123A battery makes the sensor lasts much longer than the previous version.

More information about ZOOZ #ad


Similar products



Aeotec Water Sensor, Z-Wave Flood & Leak Sensor

#ad
#ad
Aeon Labs LLC DSB45 #ad - We all protect our homes against fires and thefts, each year, but, more homes are damaged by small water leaks than larger disasters. It's z-wave plus certified to ensure it complies with the highest industry standards. Will it work with my hub? this sensor is not supported by wink, ADT Pulse, VeraLite running under UI7, veraedge, Vivint, hubitat, smartthings hub with custom device handler contact seller for instructions, home assistant, or other Z-Wave alarm panels.

Aeotec’s z-wave water Sensor helps you monitor for water leaks and floods and prevent them. Can be installed in corner, in-wall, on shelf or in downlight. Works with certified z-wave gateways and tested with Fibaro, openHAB, SmartThings, Indigo 7, Vera. Z-wave plus certified. Super accurate; can detect as little as 0

Aeotec Water Sensor, Z-Wave Flood & Leak Sensor #ad - 03% of an inch of water. Compatible z-Wave hub required, temperature, sold separately. New improved version: the included cr123A battery makes the sensor lasts much longer than the previous version. Can also detect the absence of water when used with tanks. Powered by 2 x aaa batteries and with a typical battery life of over 1 year, HomeSeer, Vera, Water Sensor is compatible with certified Z-Wave gateways including Fibaro, openHab, Samsung SmartThings, and Wink.

More information about Aeon Labs LLC DSB45 #ad


Similar products



Outdoor Z-Wave Plug w/Built-in Z-Wave Repeater | Combines a Z-Wave Outlet & Range Extender in 1 Module | On/Off Z-Wave Switch Zwave Plus | SmartThings, Wink Compatible | Inovelli

#ad
#ad
Inovelli #ad - Z-wave plus is the newest technology from z-wave, boasting a 67% increase in range, and more and is fully compatible with older Z-Wave modelsClosing WordsWe know that Home Automation can be tough for the beginner we've been there, 250% more bandwidth, so every smart home electrical outlet we sell comes with a QR code and special link that directs to a step by step tutorial video and written on how to set up your new Home Automation plug.

Simplifying lives, one smart home product at a time. It will work great with open systems like Almond Securify, HomeSeer, Qolsys, and VeraPlus. Monitor and protect against leaks and floods in real-time. Setup instructions: auto-inclusion automatically pairs to your HUB in under 5 minutes | Step-by-Step written instructions for Wink, SmartThings and Vera using Android & iOS included in the box detailed instructions you can actually understand.

Our products are designed to be easy to install and work with over 1700 of other products and more than 450 different brands. Tested compatible hub's and appliances:smartthings, amazon alexa only works thru a compatible hub - please do not buy if you do not have an external HUBNon-compatible Hubs:Samsung Connect, Staples Connect, Zipamini Zipato, Alarm dot com, Iris by Lowes, Wink see disclaimer below, Frontpoint, HomeSeer, Vera UI5 & UI7, and Qolsys.

Outdoor Z-Wave Plug w/Built-in Z-Wave Repeater | Combines a Z-Wave Outlet & Range Extender in 1 Module | On/Off Z-Wave Switch Zwave Plus | SmartThings, Wink Compatible | Inovelli #ad - If, for some reason our plug does not work with your HUB, we will fully refund you. About this smart plugthe product on this page is an outdoor z-wave pluS On/Off Smart Plug-In Module + Z-Wave Range Extender 1-Channel which has one smart plug and one "always-on" pass-thru outlet along with a built in repeater.

Certifications: ip65 rated for outdoor use, Z-Wave Plus Certified #ZC10-17105820, UL Listed.

More information about Inovelli #ad


Similar products



Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway

#ad
#ad
Aeon Labs LLC ZW090 #ad - Updated motion detection allows you to get even quicker activity reports. Customize it: choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different LED indicator modes your hub needs to support advanced parameter input. Security first: this sensor is equipped with bank-grade AES signal encryption.

Certification number: zc08-14030008. It's z-wave plus certified to ensure it complies with the highest industry standards. Will it work with my hub? this sensor is not supported by wink, smartthings hub with custom device handler contact seller for instructions, ADT Pulse, VeraLite running under UI7, hubitat, veraedge, Vivint, home assistant, or other Z-Wave alarm panels.

Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway #ad - Super-small at 1. 8 inches. Aaa battery-powered and wireless with 1 year battery life. Works with windows / mac / linux including Raspberry Pi to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1. 1 x 04 x 3. 5 inches in size and capable of controlling up to 232 different Z-Wave devices.

Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.

More information about Aeon Labs LLC ZW090 #ad


Similar products



Zooz Z-Wave Plus Smart Plug ZEN06 with 2 USB Charging Ports, White

#ad
#ad
ZOOZ CECOMINOD036986 #ad - Compatible z-Wave hub required, temperature, sold separately. New improved version: the included cr123A battery makes the sensor lasts much longer than the previous version. Setup instructions: auto-inclusion automatically pairs to your HUB in under 5 minutes | Step-by-Step written instructions for Wink, SmartThings and Vera using Android & iOS included in the box detailed instructions you can actually understand.

Wireless control of floor lamps and small appliances -energy monitoring in live mode or over time your z-wave gateway needs to support this feature -scene inclusion for custom automation scenarios when included to a Z-Wave gateway controller -LED indicator displaying Z-Wave signal strength and power usage -Security enabled Z-Wave device with AES signal encryption requires a security enabled gateway controller for full functionality -Z-Wave Plus with improved 500 chip for faster and safer wireless communication -Built-in range extender for a stronger, more reliable network -2 USB charging ports for your smart phone or tablet no Z-Wave functionality -Built-in overload protection in Z-Wave outlet and USB ports SPECIFICATIONS Model Number: ZEN06 Z-Wave Signal Frequency: 908.

Zooz Z-Wave Plus Smart Plug ZEN06 with 2 USB Charging Ports, White #ad - 42 mhz power: 110v, 60hz maximum load: 15a, 1800w uSB Charging Port Power: 1A and 2. 4a operating temperature: 14 - 104 f range: up to 130 feet line of sight Installation and Use: Indoor only Dimensions: 4" x 2. 5" x 1. 2" weight: 7oz 6-in-1 z-wave plus multisensor: motion, light lux, temperature, humidity, UV, vibration sensor.

2 year battery life. Certification number: ZC10-15060006.

More information about ZOOZ CECOMINOD036986 #ad


Similar products



Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensor

#ad
#ad
Aeotec ZW100-A #ad - It's z-wave plus certified to ensure it complies with the highest industry standards. Will it work with my hub? this sensor is not supported by wink, Vivint, hubitat, veraedge, smartthings hub with custom device handler contact seller for instructions, ADT Pulse, home assistant, VeraLite running under UI7, or other Z-Wave alarm panels.

Super-small at 1. 8 inches. Control and monitor devices remotely wherever you are. Works with windows / mac / linux including Raspberry Pi to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1. 1 x 04 x 3. 5 inches in size and capable of controlling up to 232 different Z-Wave devices.

Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensor #ad - Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades. Compatible with z-wave enabled, openhab, home Seer, Indigo 7, home automation software including Home Assistant, and OpenHab2. Aaa battery-powered and wireless with 1 year battery life. Compatible z-Wave hub required, temperature, sold separately.

New improved version: the included cr123A battery makes the sensor lasts much longer than the previous version. Certification number: ZC10-15070011.

More information about Aeotec ZW100-A #ad


Similar products



Aeotec Smart Switch 6, remote control smart plug, Z-Wave Plus, small size, side USB charging port, power metering

#ad
#ad
Aeon Labs LLC ZW096 #ad - Because it’s a smart plug, smart switch 6 will also monitor those electronics and report real-time electricity usage back to your Z-Wave system with up to 99% accuracy. On/off functionality ONLY for selected alarm systems and Wink contact seller for details. 6-in-1 z-wave plus multisensor: motion, UV, humidity, temperature, light lux, vibration sensor.

Up to 2 year battery life with 2 batteries or power via USB. Compatible with certified z-wave gateways including Samsung SmartThings, in control, open Z-Wave, mirrors vera, and homeseer. Z-wave certified. Certification number: ZC10-15070011. Certification number: ZC10-15070011. 6-in-1 z-wave plus multisensor: motion, UV, temperature, light lux, humidity, vibration sensor.

Aeotec Smart Switch 6, remote control smart plug, Z-Wave Plus, small size, side USB charging port, power metering #ad - 2 year battery life. Certification: zC10-16085160 Aaa battery-powered and wireless with 1 year battery life. Compatibility: works with most Zwave Certified HUB's - Please check compatibility below in the Product Description prior to purchasing. Compatible z-Wave hub required, temperature, sold separately. New improved version: the included cr123A battery makes the sensor lasts much longer than the previous version.

More information about Aeon Labs LLC ZW096 #ad


Similar products



Z-Wave Smart Outlet, NEO Coolcam Zwave Plug Home Automation Mini Z Wave Socket Wireless Control by Smartphone Compatible with Wink, Smartthings, Vera, Zipato, Iris and Fibaro

#ad
#ad
SHEN ZHEN NEO ELECTRONINS CO.,LTD NAS-WR02ZU #ad - Works with windows / mac / linux including Raspberry Pi to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1. 1 x 04 x 3. 5 inches in size and capable of controlling up to 232 different Z-Wave devices. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.

Compatible with z-wave enabled, openhab, Indigo 7, home automation software including Home Assistant, home Seer, and OpenHab2. Can also detect the absence of water when used with tanks. Certification: zC10-16085160 The max current is up to 13A 1, 560W. Certifications: ip65 rated for outdoor use, Z-Wave Plus Certified #ZC10-17105820, UL Listed.

Z-Wave Smart Outlet, NEO Coolcam Zwave Plug Home Automation Mini Z Wave Socket Wireless Control by Smartphone Compatible with Wink, Smartthings, Vera, Zipato, Iris and Fibaro #ad - Aes signal encryption for extra security. Tested to work with z-wave gateways including Fibaro, openHAB, Oomi, Home Assistant, SmartThings, Vera, Piper, and Wink. Z-wave plus certified. Features one 1 z-wave enabled outlet and one 1 "Always-On" outlet with two integrated outlet covers that protects module from dirt and debris when not in use.

2-in-1 outside module z-wave plug-in module + z-wave Signal Booster allows for remote control of lights, appliances, etc while also strengthening your Z-Wave Mesh Network.

More information about SHEN ZHEN NEO ELECTRONINS CO.,LTD NAS-WR02ZU #ad


Similar products



GE Z-Wave Plus Smart Lighting & Appliance Control Outdoor Module, On/Off, 1 Outlet with Weather-Resistant Outlet Cover, Plug-In, Zwave Hub Required- Works with SmartThings Wink and Alexa, 14284

#ad
#ad
Jasco 14284 #ad - It enables you to wirelessly control your seasonal lighting, fountains, pumps and other outdoor accessories. You can schedule things from anywhere in the world at any time of day. No software included. Z-wave plus certified. This plug is compatible with following alarm host: Fibaro, Iris and Wink. On/off functionality ONLY for selected alarm systems and Wink contact seller for details.

6-in-1 z-wave plus multisensor: motion, temperature, UV, humidity, light lux, vibration sensor. Up to 2 year battery life with 2 batteries or power via USB. Features one 1 z-wave enabled outlet and one 1 "Always-On" outlet with two integrated outlet covers that protects module from dirt and debris when not in use.

GE Z-Wave Plus Smart Lighting & Appliance Control Outdoor Module, On/Off, 1 Outlet with Weather-Resistant Outlet Cover, Plug-In, Zwave Hub Required- Works with SmartThings Wink and Alexa, 14284 #ad - 2-in-1 outside module z-wave plug-in module + z-wave Signal Booster allows for remote control of lights, appliances, etc while also strengthening your Z-Wave Mesh Network. Certification: zC10-160851601 x cr123a included in the box. Super-small at 1. 65 inches. 2 usb charging ports for your smartphone or tablet no Z-Wave functionality.

It will work great with open systems like Almond Securify, Qolsys, HomeSeer, and VeraPlus.

More information about Jasco 14284 #ad


Similar products